https://www.selleckchem.com/products/dn02.html 5 kWh per kg COD removed. Possible mineralization pathways are also proposed on the basis of the identified intermediates by gas chromatography coupled with mass spectroscopy. The operating cost was also calculated for the binary lab-scale treatment of the indole and pyrrole and compared with reported cost analysis for the electrochemical treatment.In this study, Zr-based metal-organic frameworks (MOFs) of UiO-66 and UiO-66-NH2 were synthesized and applied to removal of mercury from aqueous solution. The characterizations of UiO-66 and UiO-66-NH2 were examined by X-ray diffraction (XRD), scanning electron microscope (SEM), and thermogravimetric analysis (TGA). To investigate the adsorption properties of UiO-66-NH2 for mercury, the experiments of kinetics, isotherm, pH, temperature, and salt concentration were conducted, and the results were compared with those by UiO-66. The result showed that UiO-66-NH2 has a higher adsorption capacity for mercury than UiO-66. The maximum adsorption capacity of UiO-66-NH2 was 223.8 ± 17.8 mg g-1 at 313 K. The salt concentration of NaCl has a significant effect on the adsorption of mercury on UiO-66, while UiO-66-NH2 can maintain the stable adsorption capacity for mercury in the concentration range of 0.1-0.5 M NaCl. Adsorption thermodynamics result indicated that the adsorption process of mercury on UiO-66-NH2 was spontaneous and endothermic. Fourier transform infrared spectroscopy (FTIR) and X-ray photoelectron spectroscopy (XPS) analyses showed that the mercury was successfully adsorbed on the surface of UiO-66-NH2 and amino functional group as a soft base played a major role to react with mercury during the adsorption process. Graphical abstract.Wastewater from textile industries is a potential source of organic dyes in natural water bodies. Environmental concerns of chemical methods for removal of dyes from wastewater are no more a viable solution, and there is growing concern to d