9%), fragments (27%), films (24%), and pellets (11.1%). Based on the FTIR, the common types of microplastic were of high-density polyethylene, low-density polyethylene, polypropylene, and polystyrene. Further samples were evaluated for surface elemental composition in order to understand whether heavy metals get adhered to the surface of microplastic using energy-dispersive X-ray. Our results indicated the presence of microplastic in water and sediments which will lead to further study of microplastic presence in biota and microplastic pollution in freshwater systems.Here we tested the capacity of zero valent iron nanoparticles (nZVI) combined with two organic amendments, namely, compost and biochar, to immobilize metal(oid)s such as As, Cu, Pb, and Zn. In addition, the effects of the amendments on the development of Brassica juncea L., a plant widely used for phytoremediation purposes, were also examined.  https://www.selleckchem.com/products/AZD2281(Olaparib).html  To perform the experiments, pots containing polluted soil were treated with nZVI, compost-biochar, or a blend of compost-biochar-nZVI. Metal(oid)s availability and soil properties were evaluated after 15 and 75 days, and the height and weight of the plants were measured to determine development. The compost-biochar amendment showed excellent capacity to immobilize metals, but As availability was considerably increased. However, the addition of nZVI to the mixture corrected this effect considerably. In addition, soil treatment with nZVI alone led to a slight increase in Cu availability, which was not observed for the mixture with organic amendments. With respect to soil properties, the CEC and pH were enhanced by the compost-biochar amendment, thereby favoring plant growth. Nevertheless, the nanoparticles reduced the concentration of available P, which impaired plant growth to a certain extent. In conclusion, Fe-based nanoparticles combined with organic amendments emerge as powerful approaches to remediate soils contaminated by metals and metalloids.Being the largest agriculture country in the Arab world, Egypt was one of the major consumer of organochlorine pesticides (OCPs) in this area, continued to have a heavy burden of OCPs in the environment. There is growing concern that OCPs could pass from the maternal circulation through the placenta to the fetal circulation and pose several health risks to their fetuses. The current study was intended to identify OCPs residue exposure in healthy pregnant women and to justify the potential impacts of these residues on their fetuses. In this study, the prevalence of 18 OCPs was estimated in 81 maternal and cord blood samples, using Agilent 7890, gas chromatograph equipped with micro-electron capture detector (GC-μECD). Our data signposted that the heptachlor epoxide has the highest detection rate among all residues in both maternal (32%) and cord blood serum (27.16%). DDTs were still quantifiable, but with the lowest quantifiable percentage. More than 85% of mothers' serum with detectable residues transfer OCPs residue to their fetuses in a statistically significant manner (x = 42.9, p value less then 0.001). The present findings showed no significant growth retardation, or preterm delivery induced by in utero exposure to the most abundant residues. There is growing evidence that exposure to OCPs residue has profound impact on sex ratio. Methoxychlor, in this study be deemed as testosterone triggers which yields high boys ratio (x = 4.37, p less then 0.05). In conclusion, Egypt continued to have a heavy burden of OCPs residues, and fetuses and infants are especially the most vulnerable groups to their adverse health effects. Exposure to OCPs may disrupt the maternal hormones, which regulate the offspring gender, but these results need to be validated in larger sample sizes.Water resource shortage has become a major bottleneck restricting the sustainable development of China's economy and society. Identifying the driving factors of water use is helpful to put forward suggestions of water-saving society construction. This paper takes Jiangsu province as example and adopts LMDI (Logarithmic Mean Divisia Index) method to decompose the driving factors of water use change. We find that the production intensity effect and the industrial structure effect are the two dominating factors that induce the decline of total water use. Economic development effect is the most important factor to promote the increase of total water use, and domestic intensity effect is the secondary factors except for 2000-2003 period. Population scale effect on the total water use is relatively weak. The domestic intensity effect is the primary factor to promote the increase of domestic water use; the urbanization effect is a secondary factor to promote the increase of domestic water use. Based on the research conclusions, the corresponding water-saving policy is put forward.The 3-chloro-2 hydroxypropyltrimethyl ammonium chloride was successfully introduced into the β-cyclodextrin-modified chitosan to create the multicomponent adsorbent O-HTACC-g-CD. The structure of sorbent was characterized by Fourier transform infrared spectroscopy, X-ray diffraction, thermogravimetric analysis, and scanning electron microscopy. The adsorption capacity of O-HTACC-g-CD toward phenol was investigated as a function of pH, temperature, contact time as well as adsorbent dosage. The Box-Behnken response surface methodology was employed to optimize the effects of experimental parameters including adsorbent dose, pH, and time on the adsorption of phenol at 298.15 K. The obtained optimal values for adsorbent dose, pH, and time were 0.06 g, 6, and 200 min, respectively. The obtained experimental data follows the pseudo-second-order kinetic and Langmuir model. The thermodynamic parameters such as free energy change, enthalpy change, and entropy change were calculated, revealing that adsorption of phenol on O-HTACC-g-CD is a spontaneous and exothermic process. The prepared O-HTACC-g-CD displayed high adsorption capacity (39.98 mg g-1) and excellent removal rate (96%) for phenol from the aqueous solution at 288.15 K. The gained removal rates of chemical oxygen demand (CODCr) were in the range of 60.6-61.2%. Considerable results of sorption could be attributed to the multicomponent structure of the adsorbent with more active sites including the cavities, amino, and carboxyl functional groups which provided better sites for the phenolic pollutant to adsorb on the adsorbent via Van der Waals force, hydrogen bond, and the inclusion effect. Therefore, the results obtained strongly suggest that O-HTACC-g-CD could be an effective adsorbent for the removal of phenol and CODcr from drilling wastewater.