Three-dimensional braided composite has a unique spatial network structure that exhibits the characteristics of high delamination resistance, damage tolerance, and shear strength. Considering the characteristics of braided structures, two types of high-performance materials, namely, aramid and carbon fibers, were used as reinforcements to prepare braided composites with different hybrid structures. In this study, the longitudinal and transverse shear properties of 3D braided hybrid composites were tested to investigate the influences of hybrid and structural effects. The damage characteristics of 3D braided hybrid composites under short beam shear loading underwent comprehensive morphological analysis via optical microscopy, water-logging ultrasonic scanning, and X-ray micro-computed tomography methods. It is shown that the shear toughness of hybrid braided composite has been improved at certain degrees compared with the pure carbon fiber composite under both transverse and longitudinal directions. The hybrid braided composites with aramid fiber as axial yarn and carbon fiber as braiding yarn exhibited the best shear toughness under transverse shear loading. Meanwhile, the composites with carbon fiber as axial yarn and aramid fiber as braiding yarn demonstrated the best shear toughness in the longitudinal direction. Due to the different distribution of axial and braiding yarns, the transverse shear property of hybrid braided structure excels over the longitudinal shear property. The failure modes of the hybrid braided composite under the two loading directions are considerably different. Under transverse loading, the primary failure mode of the composites is yarn fracture. Under longitudinal loading, the primary failure modes are resin fracture and fiber slip. The extensive interfacial effects and the good deformation capability of the hybrid braided composites can effectively prevent the longitudinal development of internal cracks in the pattern, improving the shear properties of braided composites.The Hirao reaction involving the phosphinoylation or phosphonation of aryl halides by >P(O)H reagents is a P-C bond forming transformation belonging to the recently very hot topic of cross-couplings. The Pd- or Ni-catalyzed variations take place via the usual cycle including oxidative addition, ligand exchange, and reductive elimination. However, according to the literature, the nature of the transition metal catalysts is not unambiguous. In this feature article, the catalysts described for the Pd(OAc)2-promoted cases are summarized, and it is concluded that the "(HOY2P)2Pd(0)" species (Y = aryl, alkoxy) is the real catalyst. In our model, the excess of the >P(O)H reagent served as the P-ligand. During the less studied Ni(II)-catalyzed instances the "(HOY2P)(-OY2P)Ni(II)Cl-" form was found to enter the catalytic cycle. The newest conclusions involving the exact structure of the catalysts, and the mechanism for their formation explored by us were supported by our earlier experimental data and theoretical calculations.
  This paper describes the development of a physical activity questionnaire (PAQ) designed for Chinese adolescents and their mothers in urban and rural settings, and reports on results of the PAQ, pedometry, and hand grip dynamometry from the Chinese Children and Families Cohort Study pilot investigation (CFCS).
 
  As part of a pilot investigation to evaluate the feasibility to follow-up and obtain detailed nutrition, dietary, physical activity, and ultraviolet radiation (UVR) data from CFCS participants, data were collected in 2013 for 93 adolescent/mother pairs from a rural (
  = 41) and an urban site (
  = 52) in two provinces. Respondents were asked to wear a pedometer for seven days (Omron HJ-151), use a Takei Digital Grip Strength Dynamometer on (each hand; three trials; two separate days), and complete a 39 item, eight domain PAQ covering the past year. Self-reported physical activity (PA) was linked to metabolic equivalent of task (MET) scores in kcal/kg/hr and used to calculate METs for different domaudies should explore use of standardized survey questions concerning such fewer specific activities or instruments examining shorter time periods such as one, three, or seven day recalls.
 Device and question-based measurement of PA and strength were readily accepted in these Chinese urban and rural populations. The PAQ on physical activity in the past year produced some plausible population averages, but individual responses suggested recall challenges. If data about specific activities are required, future studies should explore use of standardized survey questions concerning such fewer specific activities or instruments examining shorter time periods such as one, three, or seven day recalls.Yarn-shaped supercapacitors with great flexibility are highly anticipated for smart wearable devices. Herein, a device for continuously producing oriented nanofiber yarn based on solution blowing was invented, which was important for the nanofiber yarn electrode to realize mass production. Further, the yarn-shaped supercapacitor was assembled by the yarn electrode with the polypyrrole (PPy) grown on aligned carbon fiber bundles@Polyacrylonitrile nanofibers (CFs@PAN NFs). Electrical conductivity and mechanical properties of the yarn electrode can be improved by the carbon fiber bundles. The specific surface area of the yarn electrode can be enlarged by PPy.  https://www.selleckchem.com/products/Eloxatin.html  The yarn-shaped supercapacitors assembled by the PVA/LiCl/H3PO4 gel electrolyte showed high areal specific capacitance of 353 mF cm-2 at a current density of 0.1 A g-1, and the energy density was 48 μWh cm-2 when the power density was 247 μW cm-2. The supercapacitors also exhibited terrific cycle stability (82% after 20,000 cycles). We also proved that this yarn-shaped supercapacitor could easily power up the light emitting diode. This yarn-shaped supercapacitor was meaningful for the development of the smart wearable devices, especially when combined with clothing or fabrics.Acute myeloid leukemia (AML) is a heterogeneous disease generated by the acquisition of multiple genetic and epigenetic aberrations which impair the proliferation and differentiation of hematopoietic progenitors and precursors. In the last years, there has been a dramatic improvement in the understanding of the molecular alterations driving cellular signaling and biochemical changes determining the survival advantage, stimulation of proliferation, and impairment of cellular differentiation of leukemic cells. These molecular alterations influence clinical outcomes and provide potential targets for drug development. Among these alterations, an important role is played by two mutant enzymes of the citric acid cycle, isocitrate dehydrogenase (IDH), IDH1 and IDH2, occurring in about 20% of AMLs, which leads to the production of an oncogenic metabolite R-2-hydroxy-glutarate (R-2-HG); this causes a DNA hypermethylation and an inhibition of hematopoietic stem cell differentiation. IDH mutations differentially affect prognosis of AML patients following the location of the mutation and other co-occurring genomic abnormalities.