https://www.selleckchem.com/products/pf-06700841.html Microbial electrolysis cell (MEC) has excellent CH4 production performance, however, CO2 still remains in the produced biogas at high content. For achieving in-situ CO2 sequestration and thus upgrading biogas, mineral carbonation was integrated into a MEC treating sludge hydrolysate. With 19 g/L wollastonite addition, in-situ mineral CO2 sequestration was achieved by formation of calcite precipitates. CH4 content in the biogas was increased by 5.1 % and reached 95.9 %, with CH4 production improved by 16.9 %. In addition, the removals of polysaccharide, protein, and chemical oxygen demand (COD) of the MEC were increased by 4.4 %, 6.7 %, and 8.4 %, respectively. The generated precipitates rarely accumulated on bio-cathode, and did not significantly affect the morphology of cathode biofilm. However, integrating mineral carbonation resulted in a higher relative abundance of Methanosarcina on anode and slightly decreased the ratio of Methanobacterium to Methanosaeta on cathode, which should be noticed. In conclusion, integrating mineral carbonation is an attractive way to improve the performance of MEC by achieving in-situ CO2 sequestration, accompanied with CH4 production enhancement. In this study, we prepared poly(acryloyl hydrazide) (PAH)-grafted cellulose nanocrystal (CNC-PAH) particles via the atom transfer radical polymerization method for application to Cr(VI) adsorption. The closely-packed PAH chains grafted on the cellulose nanocrystal (CNC) surface provide a high density of amine groups that can adsorb Cr(VI) through strong electrostatic, hydrogen bonding and chelating interactions. CNC-PAH exhibited the optimum Cr(VI) adsorption capacity at the solution pH = 3, where its electrostatic attraction with Cr(VI) was maximized. Cr(VI) was chemisorbed in CNC-PAH by following the Langmuir isotherm mechanism (homogeneous monolayer adsorption). The Cr(VI) adsorption kinetics of CNC-PAH was controlled predominantly b