Replacing Lock on uPVC Door To replace the lock, you must first remove the handle and screw holes. This is generally simple to do. The next step is to find the screw which holds the lock barrel in place. This is usually colored differently than the other screws and located on the outside of the faceplate. Take the Cylinder off To change the lock on your upvc doors first, you must take off the cylinder that is currently in use. This is a fairly simple process that can be done within 30 minutes. All you need is a small screwdriver. You'll need the Euro cylinder fixing screw, which is usually in the edging on the inside of the door, next to the lock cylinder. The screw should be easily identifiable because it is typically different from the rest of them. Remove this screw and keep it in a safe place. After you have removed the cylinder, you can then begin removing the handle. To do this, simply open the door to allow full access to the inside edging of the door as well as the side of the lock faceplate. Begin with a screwdriver and take off the screw that is holding the handle to the door. Once the screw is removed you can pull the handle towards you, and then the rest of it out of the door. If you're having difficulty getting the handle off the door frame, you may have to take it off. This can be done with the aid of a screwdriver or drill, and you'll need be careful not to damage the screw head or cross-thread the screw. When you're ready for replacing the cylinder, ensure that it's the correct size for your door. Cylinders are sized according to two measurement points: (a) the distance from the centre of the Fixing Screw hole to the bottom of the cylinder, and (b) the distance between the keyhole and the edge of the lock plate. Take the handle off If your upvc door handle becomes stiff or loose, the good news is that this is a fairly easy problem to repair. The cause is usually down to wear and tear with the cylinder or internal parts of the multipoint lock which are inside the door between the handle and its frame. The weather, the heavy use or ageing can cause upvc locks to wear. This can lead to issues with the locking and closing mechanisms of the door. The cylinder can become worn and make it difficult to turn the key. The lock could also become stiff, causing the handle to loosen. The cylinder can be replaced, and it is a simple process. It is possible to do it yourself, but some understanding of how the mechanism operates is required. The first step is to remove the handle, which will allow you to access the cylindrical and replace it with a new one. You will require an electric screwdriver and measuring tape for this. It is essential to know the exact measurements of your cylinder, to be able to get a replacement cylinder that fits. The cylinder is the component that lets you lock your upvc door, and it is essential to make sure you purchase an identical replacement size. To take off the old cylinder, you will need to unscrew the screws that secure it. Be careful not to strip the screws, as this may make it difficult to remove them again in the future. After the screws have been removed the cylinder will pop out easily. Take off the Lock Barrel uPVC doors are made with strong materials and are designed to ensure your home is safe and secure. They are available in a variety of styles and colors that will fit any style. These doors are also maintenance-free and thermally efficient. However, they aren't without their disadvantages. The locking point, also known as a barrel lock, can be damaged over time and must be replaced. It's a simple process, but you should be aware of a few points before you begin. To access the screw holding the lock cylinder, you'll have to remove the door handle. It's usually a different colour from the other screws and is located near the edge of the door, near where the keyhole is located. Remove the screw and put it away in a safe place. Then, slowly move the door's outside and inside handles. Be sure you take your time and not move too fast, as it may cause damage to your uPVC door. After removing the handles then, you can use a screwdriver to take off the screws that attach the handles to the door frame. This will allow you better access to the support pins that are holding the cylinder in place. You can then move the cylinder in order to see if this can loosen it. If it does, pull it towards you, then pull it out of the socket. After removing the old lock cylinder, it is crucial to replace it with a new one which has anti-snap protection and anti-bump. It is best to let a professional locksmith do this for you, but you can do it yourself with the right tools. It's a relatively simple task that should take about five minutes to complete. Install the New Cylinder A upvc lock could be damaged or broken in a variety of different ways. For example the cylinder could have become damaged or not working as it should. It is crucial to select the right size replacement for your door's upvc lock. If the wrong lock is installed, your doors could be more vulnerable to the 'lock snapping technique that is responsible for 25% of burglaries. To prevent this from happening to avoid this, it is crucial that the correct cylinder is used and the procedure for doing it is a breeze and only takes about five minutes. To change the cylinder and handle faceplate it is necessary to take off the screws that are attached to them. Before you get started, make sure that the handle is in a position to open and that you have complete access to the inside edge of the door as well as the side of the handle faceplate that holds the lock cylinder. This is to ensure that you are able to easily detach the lock cylinder without needing to move the handle on the door to expose any internal parts of the handle frame. The next step is to remove the old cylinder and measure it, you will need to be aware of the overall length and the diameter of the cam that moves to lock and unlock the door. This will allow you to find a replacement of similar in size or smaller. This is the most crucial part of the whole procedure. The cylinder should be flush with the handle, and not protrude more than 5mm beyond it. Install the Handle A upvc lock may be jammed if there is a break in the case, which controls the bolts that retract into the strike or keep plate. Most often, this can be resolved by making an Allan key adjustment beneath the hinges of the door but often this may put excessive pressure on parts inside the centre case, so it is best to seek the help of a professional. It is crucial to have quick and simple access to both sides when changing the handle. Also, it is essential to use the correct tools. It is a good idea to prop the door up so that it does not close during the process. https://www.repairmywindowsanddoors.co.uk/christchurch-window-lock-repairs-near-me/ is to loosen the screws that keep the handle in place with an screwdriver. Once they are loose the handle can then be removed. After removing the cylinder and the handle, it's now time to put in the new handle. Ensure that the new handle is of the correct size for the cylinder you have currently and hole in the center. Verify the length of the spindle on the lever you are currently using to determine this. Also make sure that the screw fixing centres on the handle match the screw fixing centres on your existing cylinder and hole centre. The replacement handles offered by Fab and Fixed are available in a wide range of styles and are made to last. They are ideal for those who wish to upgrade their upvc handles and increase their home security. A good handle will ensure that your house is secure and safe, and will not be easy for burglars to gain entry.