Mixed surfactants have a prominent synergistic effect and show advantages in many aspects. In this work, the effects of a mixture of dodecyltrimethylammonium bromide (DTAB) and sodium dodecyl sulfate (SDS) on the flotation of low-rank coal were studied from the wetting rate, contact angle, surface tension, and zeta potential. Furthermore, the adsorption configuration of the mixed surfactant on the surface of oxygen-containing graphite was simulated at the molecular level by molecular dynamics simulation. The experimental results show that the combustible matter recovery of low-rank coal flotation is improved using the mixed surfactant, and the contact angle test and wetting rate test confirmed the synergistic effect of the mixed surfactant. In the mixed surfactant system, the addition of SDS with an opposite charge to DTAB can reduce the mutual repulsion between DTAB molecules and enhance the degree of DTAB alignment in solution, which was analyzed by surface tension and zeta potential tests. Meanwhile, the simulation results reveal the adsorption behavior of anionic and cationic surfactants on the surface of oxygen-containing graphite from the molecular level and also verify the experimental results. This investigation provides a good understanding of the interaction mechanism of mixed surfactants in low-rank coal flotation.The spontaneous combustion of the sulfur concentrate is the main hazard faced in ore storage bins. To understand the thermodynamic characteristics of spontaneous combustion of the sulfur concentrate and test whether the kinetic compensation effects are present in the spontaneous combustion process of the sulfur concentrate, typical sulfur concentrate samples were selected as the research object, and thermogravimetric experiments were carried out under an air atmosphere at heating rates of 5, 10, and 15 K/min. On this basis, the contributions of different reaction models to the mass change during the spontaneous combustion of the sulfur concentrate, as well as the thermodynamic model and kinetic compensation effect, are analyzed. The results show that solid-phase combustion contributes the most to mass loss among different mechanisms of the reaction between the sulfur concentrate and oxygen. The contributions of reaction models to mass loss are affected by the different heating rates, and the contribution of solid-phase combustion to mass loss increases with increasing heating rates. The Malek method is used to obtain the kinetic model of the spontaneous combustion of the sulfur concentrate, and its mechanism function changes from a chemical reaction model to a three-dimensional diffusion model. There is a kinetic compensation effect in the spontaneous combustion process of the sulfur concentrate, and the level of the kinetic compensation line may be one of the bases for distinguishing the spontaneous combustion tendency of the sulfur concentrate.Magnetofluidics is a dynamic research field, which requires novel sensor solutions to boost the detection limit of tiny quantities of magnetized objects. Here, we present a sensing strategy relying on planar Hall effect sensors in droplet-based micro-magnetofluidics for the detection of a multiphase liquid flow, i.e., superparamagnetic aqueous droplets in an oil carrier phase. The high resolution of the sensor allows the detection of nanoliter-sized superparamagnetic droplets with a concentration of 0.58 mg/cm3, even when they are biased in a geomagnetic field only. The limit of detection can be boosted another order of magnitude, reaching 0.04 mg/cm3 (1.4 million particles in a single 100 nL droplet) when a magnetic field of 5 mT is applied to bias the droplets. With this performance, our sensing platform outperforms the state-of-the-art solutions in droplet-based micro-magnetofluidics by a factor of 100. This allows us to detect ferrofluid droplets in clinically and biologically relevant concentrations and even below without the need of externally applied magnetic fields. These results open the route for new strategies of the utilization of ferrofluids in microfluidic geometries in, e.g., bio(-chemical) or medical applications.Recently, green synthesis of silver/silver chloride nanoparticles (Ag/AgCl-NPs) has gained a lot of interest because of the usage of natural resources, rapidness, eco-friendliness, and benignancy. Several researchers reported that silver-based biogenic NPs have both antimicrobial and anticancer properties. In the present study, Ag/AgCl-NPs were synthesized from Zizyphus mauritiana fruit extract, and their antibacterial, antifungal, and antiproliferative mechanisms against human MCF-7 cell lines were evaluated. Synthesis of Ag/AgCl-NPs from the Z. mauritiana fruit extract was confirmed by the changes of color and a peak of the UV-visible spectrum at 428 nm. The nanoparticles were characterized by transmission electron microscopy, energy dispersive X-ray, X-ray powder diffraction, thermal gravimetric analysis, atomic force microscope, and Fourier transform infrared. Antibacterial activity was checked against four pathogenic bacteria and two fungi. Cytotoxicity was checked against human breast cancer cell line ( cells. The expression level of FAS, FADD, and caspase-8 genes increased several folds with the decrease of PARP gene expression. These results demonstrated that the anti-proliferation activity of Ag/AgCl-NPs against MCF-7 cells resulted through ROS generation and induction of apoptosis through the Fas-mediated pathway.Food waste is a promising resource for the production of fuels and chemicals. However, increasing plastic contamination has a large impact on the efficiency of conversion for the more established biological routes such as anaerobic digestion or fermentation. Here, we assessed a novel route through the hydrothermal liquefaction (HTL) of a model waste (pistachio hulls) and polypropylene (PP). Pure pistachio hulls gave a biocrude yield of 34% (w/w), though this reduced to 16% (w/w) on the addition of 50% PP in the mixture. The crude composition was a complex blend of phenolics, alkanes, carboxylic acids, and other oxygenates, which did not change substantially on the addition of PP. Pure PP does not breakdown at all under HTL conditions (350 °C, 15% solids loading), and even with biomass, there is only a small synergistic effect resulting in a conversion of 19% PP.  https://www.selleckchem.com/products/bexotegrast.html  This conversion was enhanced through using typical HTL catalysts including Fe, FeSO4·7H2O, MgSO4·H2O, ZnSO4·7H2O, ZSM-5, aluminosilicate, Y-zeolite, and Na2CO3; the conversion of PP reached a maximum of 38% with the aluminosilicate, for example.