https://www.selleckchem.com/products/brivudine.html Additionally, a porosity model derived from movable fluids using NMR data has been established and provided better prediction effect compared with the classic Coates and Schlumberger Doll Research (SDR) models. Fractal analysis and permeability estimation are shown to be quite effective for investigating microscopic behaviors and in predicting the reservoir quality of low-permeability sandstone reservoirs.Glycidyl methacrylate (GMA) and a mixture of alkyl methacrylates (average chain length of 13 carbons; termed C13MA; derived from vegetable oils) were copolymerized by nitroxide-mediated polymerization to form epoxidized statistical and block copolymers with similar compositions (F GMA ∼0.8), which were further cross-linked by a bio-based diamine. Hybrid plate-like nanoparticles containing organophosphorus-titanium-silicon (PTS) with an average size of ∼130 nm and high decomposition temperature (485 °C) were synthesized via a hydrothermal reaction to serve as additives to simultaneously enhance the thermal and mechanical properties of the blend. Nanocomposites filled with PTS were prepared at different filler-loading levels (0.5, 2, 4 wt %). Transmission electron microscopy (TEM) of the cured block copolymer displayed reaction-induced macrophase-separated domains. TEM also showed an effective dispersion of PTS hybrids in the matrix without intense agglomeration. Thermogravimetric analysis at different heating rates revealed the activation energy of poly (GMA-stat-C13MA) at maximum decomposition increased from 143.5 to 327.2 kJ mol-1 with 4 wt % PTS. Decomposition temperature and char residue improved 12 °C and ∼7 wt %, respectively, and T g increased 12 °C by adding 4 wt % PTS. Targeting various PTS concentrations enabled tuning of the tensile modulus (up to 75%), tensile strength (up to 46%), and storage modulus in both glassy state (up to 59%) and rubbery plateau regions (up to 88%). Oscillatory frequency sweeps