https://www.selleckchem.com/products/Cryptotanshinone.html While tensile strain in the first Cu monolayer significantly destabilizes the adsorption strength, compressive strain in the first Au monolayer has a minimal impact on the heat of adsorption. Hence, this study introduces and, by comparison with previous experiments, validates an efficient DFT-based approach for strain-engineering the stability, and, in turn, the catalytic performance, of active sites in bimetallic alloys with atomic level resolution.The relationship between the excess volume and the structure of Fe-Cr-Ni melts is investigated using containerless levitation and in situ high-energy synchrotron x-ray diffraction techniques. The density of six hypoeutectic Fe-Cr-Ni alloys along the 72 wt. % Fe isopleth was measured in the stable and undercooled regions, and the excess volume was evaluated as a function of Cr concentration. It is found that the 72Fe-Cr-Ni alloys exhibit a positive sign of excess volume and the amount increases with increasing Cr concentration. Analysis of the structure factor and pair distribution function of the alloy family reveals that the short-range order in the melt becomes more pronounced with decreasing Cr concentration; this demonstrates a direct correlation between the excess volume and local liquid structure. A characteristic signature of the icosahedral structure is observed in the structure factor of the melts, and the potential origin of the positive excess volume of the 72Fe-Cr-Ni alloys is qualitatively discussed in relation to the icosahedral structure.Yttria-stabilized zirconia (YSZ) is an important material with wide industrial applications particularly for its good conductivity in oxygen anion transportation. The conductivity is known to be sensitive to Y concentration 8 mol. % YSZ (8YSZ) achieves the best performance, which, however, degrades remarkably under ∼1000 °C working conditions. Here, using the recently developed SSW-NN method, stochastic surface wal