https://www.selleckchem.com/products/Adriamycin.html Aquifer materials and low temperature did not influence the density control effect of CBLA. This research advances the practical application of density control of DNAPLs using CBLA, and makes important contributions for subsequent combined remediation approach.Hexavalent chromium in soda ash Chromite Ore Processing Residue (COPR) is harmful to the environment, it is imperative to develop a low cost, efficient, and effective treatment. Herein, a new method (ball milling+sodium sulfide) was developed for mechanochemical treatment of water-leached COPR (W-COPR, about 900 mg/kg non-exchangeble Cr(VI) and mostly chromite bounded). Under a stoichiometric ratio of S2- to Cr(VI) of 5, milling speed of 200 rpm, milling time of 30 min, ball-to-powder weight ratios of 8.5, and, a total Cr(VI) of 76.88 mg/kg and a Toxicity Characteristic Leaching Procedure (TCLP) total Cr value of 1.15 mg/L were achieved after treatment. Results of the mineral liberation analyser (MLA) analyses showed 10% increase of chromite grains liberation and grain size reduction were beneficial to the chromite-bound Cr(VI) reduction. Similar effects were also observed on magnesioferrite encapsulated Cr(VI). Particle aggregation and formation of glass phase colloid precipitation could potentially impede Cr(VI) reduction. Results of X-ray absorption near edge structure (XANES) analyses indicated that the treatment method reduced the actual Cr(VI) concentration to 312 mg/kg with Cr(VI) reduction efficiency of 98% being achieved. Overall, the new method is simple and efficient, and provides a guidance for future industrial application.Halloysite was processed at 600 °C and then by acid leaching with HCl solutions of different concentrations, i.e. 0.5, 3 and 5 N (H600-xN; x = 0.5, 3 or 5). The resulting materials underwent chemical, textural, and laser diffraction analyses and were used in crystal violet (CV) adsorption. Bath experiments were conducted to ev