In light of the growth in demand for multiband antennas for medical applications, this research proposes a MICS/ISM meander-line microstrip antenna encapsulated in an oblong-shaped pod for use in diagnoses of the gastrointestinal tract. The proposed antenna is operable in the Medical Implant Communication System (MICS) and the Industrial, Scientific and Medical (ISM) bands. The antenna structure consists of a meander-line radiating patch, a flipped-L defected ground plane, and a loading resistor for antenna miniaturization. The MICS/ISM microstrip antenna encapsulated in an oblong-shaped pod was simulated in various lossy-material environments. In addition, the specific absorption rate (SAR) was calculated and compared against the IEEE C95.1 standard. For verification, an antenna prototype was fabricated and experiments carried out in equivalent liquid mixtures, the dielectric constants of which resembled human tissue. The measured impedance bandwidths (|S11| ≤ -10 dB) for the MICS and ISM bands were 398-407 MHz and 2.41-2.48 GHz. The measured antenna gains were -38 dBi and -13 dBi, with a quasi-omnidirectional radiation pattern. The measured SAR was substantially below the maximum safety limits. As a result, the described MICS/ISM microstrip antenna encapsulated in an oblong-shaped pod can be used for real-time gastrointestinal tract diagnosis. The novelty of this work lies in the use of a meander-line microstrip, flipped-L defected ground plane, and loading resistor to miniaturize the antenna and realize the MICS and ISM bands.The combination of 3D printing and navigation promises improvements in surgical procedures and outcomes for complex bone tumor resection of the trunk, but its features have rarely been described in the literature. Five patients with trunk tumors were surgically treated in our institution using a combination of 3D printing and navigation. The main process includes segmentation, virtual modeling and build preparation, as well as quality assessment. Tumor resection was performed with navigated instruments. Preoperative planning supported clear margin multiplanar resections with intraoperatively adaptable real-time visualization of navigated instruments. The follow-up ranged from 2-15 months with a good functional result. The present results and the review of the current literature reflect the trend and the diverse applications of 3D printing in the medical field. https://www.selleckchem.com/products/sgi-110.html 3D printing at hospital sites is often not standardized, but regulatory aspects may serve as disincentives. However, 3D printing has an increasing impact on precision medicine, and we are convinced that our process represents a valuable contribution in the context of patient-centered individual care.Salivarian trypanosomes are extracellular parasites causing anthroponotic and zoonotic infections. Anti-parasite vaccination is considered the only sustainable method for global trypanosomosis control. Unfortunately, no single field applicable vaccine solution has been successful so far. The active destruction of the host's adaptive immune system by trypanosomes is believed to contribute to this problem. Here, we show that Trypanosome brucei brucei infection results in the lasting obliteration of immunological memory, including vaccine-induced memory against non-related pathogens. Using the well-established DTPa vaccine model in combination with a T. b. brucei infection and a diminazene diaceturate anti-parasite treatment scheme, our results demonstrate that while the latter ensured full recovery from the T. b. brucei infection, it failed to restore an efficacious anti-B. pertussis vaccine recall response. The DTPa vaccine failure coincided with a shift in the IgG1/IgG2a anti-B. pertussis antibody ratio in favor of IgG2a, and a striking impact on all of the spleen immune cell populations. Interestingly, an increased plasma IFNγ level in DTPa-vaccinated trypanosome-infected mice coincided with a temporary antibody-independent improvement in early-stage trypanosomosis control. In conclusion, our results are the first to show that trypanosome-inflicted immune damage is not restored by successful anti-parasite treatment.Most head and neck lymphoepithelial carcinomas (LECs) arise in the nasopharynx and harbor Epstein-Barr virus (EBV). LEC is also a rare subtype of the oral squamous cell carcinoma (SCC). Morphologically, LEC is defined as resembling non-keratinizing nasopharyngeal carcinoma, undifferentiated subtype. The histological features and pathogenesis of oral LEC are not established. We describe a case of tongue LEC with histopathological diagnostic difficulties. A 72-year-old Japanese female presented with a whitish change on her left-side tongue. The diagnosis was atypical epithelium; neoplastic change could not be ruled out by a biopsy. Although the lesion was monitored at our hospital per her request, invasive carcinoma was detected 11 months later. Microscopically, conventional SCC was observed with the characteristic features as LEC confined to the deep part of the lesion. We briefly discuss this unusual histological finding and make a novel proposal for distinguishing oral LEC from LECs in other regions based on these histological findings.This work demonstrates a novel method to deposit an antibacterial TiO2 thin film on a polymer substrate at room temperature. A combination of sol-gel and photon assistance was used in the experiment in order to avoid any thermal processes of thin film crystallization. The morphological photograph of samples indicated that the TiO2 thin film was perfectly coated on the PVC substrate without any cracks or pinholes. Chemical analysis by EDS and XPS reported that the thin film consisted of titanium (Ti), oxygen (O), and carbon (C). The Raman spectrum proved that the thin film was the anatase phase of TiO2 and, furthermore, that it was contaminated with carbon remaining from the photon assistance process. In addition, the optical band gap of the thin film was 3.35 eV, suggesting that the photocatalytic activity of TiO2 should occur under UV-A radiation. The bacteria viability assay was examined using E. coli and S. typhimurium as indicator strains under UV-A irradiation (365 nm) at different times. The data from OD and CFU count revealed that >97% of bacteria were killed after 60 min of irradiation, and the bacteria were completely killed at 120 min for E.