https://www.selleckchem.com/products/PF-2341066.html The adsorption process can be well described by the pseudo-second-order kinetic model. Results of zeta potential, contact angles and infrared spectrum showed TMP replacing proteins embedded into the cell membrane enhancing the TMP adsorption capacity of activated sludge after EPS extraction. Our results demonstrated that less proteins in EPS of activated sludge is more beneficial for TMP adsorption removal.Dyes are hazardous compounds commonly found in industrial wastewaters. Efficient and inexpensive removal of dye molecules from the water matrix has been demonstrated by adsorption processes. Magnetic nano-adsorbents, such as metal ferrites, can be efficiently recovered from the reaction mixture after treating the pollutant. Herein, MFe2O4@GO (M = Cu, Co or Ni) was synthesized via solution combustion method for the removal of dye molecules from aqueous solutions. The characteristics of the MFe2O4@GO, including surface area and pore diameter, surface functional groups, and elemental composition, were examined. Methylene blue was used as representative dye pollutant. Batch adsorption results conformed to the Langmuir isotherm. Maximum adsorption capacities of the MFe2O4@GO (M = Cu, Co or Ni) were 25.81, 50.15 and 76.34 mg g-1, respectively. Kinetics of methylene blue adsorption fitted the pseudo-second-order model. Overall, NiFe2O4@GO exhibited the highest adsorbent performance among the graphene-metal ferrites investigated, primarily because of its high specific surface area and presence of mesopores.Microplastics prepared from commercial marine antifouling paints were weathered by UV-C irradiation representing between 25 and 101 days of real-time, outdoor exposure. Attenuated Total Reflection Fourier Transform Infrared (ATR-FTIR) spectroscopy of the degraded paint particles showed that weathering induced chemical changes in the material, including the release of volatile components and the formation of hydrophili