https://www.selleckchem.com/products/abt-199.html In this work we describe the software's framework and provide details to guide users to design a metasurface layout using MetaOptics.In this paper, we study the power scaling in high power continuous-wave Raman fiber amplifier employing graded-index passive fiber. The maximum output power reaches 2.087 kW at 1130 nm with an optical conversion efficiency of 90.1% (the output signal power versus the depleted pump power). To the best of our knowledge, this is the highest power in the fields of Raman fiber lasers based merely on Stokes radiation. The beam quality parameter M2 improves from 15 to 8.9 during the power boosting process, then beam spot distortion appears at high power level. This is the first observation and analysis on erratic dynamic properties of the transverse modes in high power Raman fiber amplifier.Considering the importance of the laser wavelength response and the difficulty in its real-scenario measurement in WMS, a high-accuracy and universal method was developed to characterize the relative wavelength response (RWR) by analyzing the laser current response. A coupling term that depends on both the current scan and the modulation characteristic was introduced to describe the coupling effect between the wavelength scan and modulation. The accuracy of the proposed method was verified with different laser working conditions and scan waveforms. All fitting residuals of the RWR result from the proposed method are smaller than 0.1% of the total scan range and the fitting residual of the ramp scanned WMS is twice smaller than the minimum value from literature. The better calibration-free 2f/1f fitting and more accurate CO2 concentration results also suggest the high accuracy and superiority of the proposed method. Finally, based on the precise prediction of RWR with small scan and modulation indices, the spectral parameters, including line strength and self-collisional broadening coefficient, of CO2 transi