Fiber optic sensors are increasingly used in several fast-growing industries. Aerospace, energy storage, and the medical sector consider new implementations of optical fibers mainly for condition monitoring purposes. Applications using optical fibers entail measurements of distributed strains and temperatures.  https://www.selleckchem.com/products/larotrectinib.html  However, the spectral shifts of transmitted and reflected light are simultaneously sensitive to both of these influences. This coupled sensitivity can introduce large errors for signal interpretation. An accurate calculation model for signal decoupling is necessary to distinguish pure mechanical strains from pure thermal loading. Approaches where the spectral shift is assumed to vary linearly with temperature give large errors when the temperature variation is high. This investigation derives and validates a new temperature formula that is used for high precision strain and temperature discrimination. The non-linear temperature formula is deduced from physics-based models and is validated with Rayleigh backscattering based OBR measurements. Our calculation approach demonstrates improved accuracy over an extended temperature range. The relationship between strain and temperature effects in the coupled mechanical and thermal loading environment is further studied in detail.The coordinate transformation method (C method) is a powerful tool for modeling photonic structures with curved boundaries of discontinuities. As a modal method upon the Fourier basis, the C method has superior computational efficiency and rich physical intuitiveness compared to other full-wave numerical methods. But presently the C method is limited to two-dimensional (2D) structures if the boundaries between adjacent z-invariant layers are of generally different profiles [with (x,y,z) being the Cartesian coordinate]. Here we report a nontrivial extension of the C method to the general case of three-dimensional (3D) structures with curved boundaries of different profiles between adjacent layers. This extension drastically enlarges the applicability of the C method to the various interesting structures in nanophotonics and plasmonics. The extended 3D-C method adopts a hybrid coordinate transformation which includes not only the z-direction coordinate transformation in the classical C method but also the x- and y-direction matched coordinates adopted in the Fourier modal method (FMM), so as to exactly model the curved boundaries in all the three directions. The method also incorporates the perfectly matched layers (PMLs) for aperiodic structures and the adaptive spatial resolution (ASR) for enhancing the convergence. A modified numerically-stable scattering-matrix algorithm is proposed for solving the equations of boundary condition between adjacent z-invariant layers, which are derived via a transformation of the full 3D covariant field-components between the different curvilinear coordinate systems defined by the different-profile top and bottom boundaries of each layer. The validity of the extended 3D-C method is tested with several numerical examples.Three dimensional reconstruction of objects using a top-down illumination photometric stereo imaging setup and a hand-held mobile phone device is demonstrated. By employing binary encoded modulation of white light-emitting diodes for scene illumination, this method is compatible with standard lighting infrastructure and can be operated without the need for temporal synchronization of the light sources and camera. The three dimensional reconstruction is robust to unmodulated background light. An error of 2.69 mm is reported for an object imaged at a distance of 42 cm and with the dimensions of 48 mm. We also demonstrate the three dimensional reconstruction of a moving object with an effective off-line reconstruction rate of 25 fps.In this paper, we report the use of a 3-meter low-loss anti-resonant hollow-core fiber (AR-HCF) to deliver up to 300 W continuous-wave laser power at 1080 nm wavelength from a commercial fiber laser source. A near-diffraction-limited beam is measured at the output of the AR-HCF and no damage to the uncooled AR-HCF is observed for several hours of laser delivery operation. The limit of AR-HCF coupling efficiency and laser-induced thermal effects that were observed in our experiment are also discussed.Vertical-cavity surface-emitting lasers (VCSELs) play a key role in the development of the next generation of optoelectronic technologies, thanks to their unique characteristics, such as low-power consumption, circular beam profile, high modulation speed, and large-scale two-dimensional array. Dynamic phase manipulation of VCSELs within a compact system is highly desired for a large variety of applications. In this work, we incorporate the emerging microfluidic technologies into the conventional VCSELs through a monolithic integration approach, enabling dynamic phase control of lasing emissions with low power consumption and low thermal generation. As a proof of concept, a beam steering device is experimentally demonstrated by integrating microfluidic channel on a coherently coupled VCSELs array. Experimental results show that the deflection angles of the laser beam from the chip can be tuned from 0° to 2.41° under the injection of liquids with different refractive index into the microchannel. This work opens an entirely new solution to implement a compact laser system with real-time wavefront controllability. It holds great potentials in various applications, including optical fiber communications, laser printing, optical sensing, directional displays, ultra-compact light detection and ranging (LiDAR).This paper proposes an electronically reconfigurable unit cell for transmit-reflect-arrays in the X-band, which makes it possible to control the reflection or transmission phase independently by combining the mechanisms of reconfigurable transmitarrays and reconfigurable reflectarrays. The fabricated unit cell was characterized in a waveguide simulator. The return loss in the reflection mode and insertion loss in the transmission mode are smaller than 1.8 dB for all states at 10.63 GHz, and a 1-bit phase shift for both modes is achieved within 180° ± 10°. When compared to full-wave electromagnetic simulation results, the proposed unit cell shows good results and is thus verified.