https://www.selleckchem.com/products/tertiapin-q.html We present a fast shape measurement of micro-parts based on depth discrimination in imaging with LED illumination. It is based on a 4f-setup with an electrically adjusted tunable lens at the common Fourier plane. Using such a configuration, the opportunity to implement a fast depth scan by means of a tunable lens without the requirement of mechanically moving parts and depth discrimination using the limited spatial coherence of LED illumination is investigated. The technique allows the use of limited spatially partially coherent illumination which can be easily adapted to the test object by selecting the geometrical parameters of the system accordingly. Using this approach, we demonstrate the approach by measuring the 3D form of a tilted optically rough surface and a cold-formed micro-cup. The approach is robust, fast since required images are captured in less than a second, and eye-safe and offers an extended depth of focus in the range of few millimetres. Using a step height standard, we determine a height error of ±1.75 μm (1σ). This value may be further decreased by lowering the spatial coherence length of the illumination or by increasing the numerical aperture of the imaging system.A vector ray-tracing model (VRT) has been developed to compute the optical caustics associated with the primary rainbow for an oblate spheroidal water drop illuminated by a Gaussian beam. By comparing the optical caustic structures (in terms of limiting rainbow and hyperbolic umbilic fringes) for a water drop with a Gaussian beam (GB) illumination with that for the same drop, but with parallel beam (PB) illumination, the influence of the Gaussian beam on the optical caustics is investigated. For a water drop with GB illumination and different drop/beam ratios (i.e., the ratio between the drop equatorial radius and the Gaussian beam waist), the location of cusp points and the curvature of the limiting rainbow fringe are also studi