How to Choose a Smart Lock For Double Glazed Door It's important to select locks that are smart and meet high security standards when you're shopping for double door locks. This includes being SS312 diamond approved or at the very least Kitemarked TS007 3-Star which stops locking snapping. Ensure your doors are prepped with bore holes prior to choosing a smart lock. You may have to install a hinge bolt or another additional security measure if you do not. uPVC Door Locks Most uPVC doors come with an euro cylinder lock that is concealed within the handle and connects to a multi-lock system inside the door frame. The issue with many older or cheaper uPVC doors is that locking mechanisms for cylinders can easily be'snapped', rendering the multi-lock system ineffective and allowing intruders to gain access into your home. A better quality uPVC door should use an anti-snap euro-cylinder that is much more secure and difficult to tamper with. A multipoint lock is the most popular lock for uPVC doors as it provides more security than one cylinder lock. They typically have a longer appearance and lock at a variety of points on the door and frame to stop burglars from getting access to the unlocked side of the door. If you are looking for an multipoint locking system for your uPVC doors, be sure to select a lock that is approved by the most stringent standards of security. The most secure locks are those that have been approved to SS312 Diamond, or at least Kitemarked in accordance with TS007 3-Star. Both of these standards include tests to protect against lock snapping. WD40 will help prolong the life of your uPVC locks and also prevent them from becoming stiff. It also stops the handle from sliding as you use it. This could be a sign of a problem with the internal springs that will need to be repaired, or that you are applying too much force when locking the doors. If you're looking to replace your uPVC locks, it is recommended that you contact an experienced locksmith who specializes in uPVC lock replacement. They can advise you on which lock is best for your door and offer you a cost-effective quote. They can also change handles and repair damaged panels, if needed. A professional uPVC locksmith typically charges between PS35 and PS50 for the replacement of your uPVC door locks. They will provide an efficient service swift and performed to a high standard. If they need to rekey locks or fix any windows that have been damaged, it is an additional cost. uPVC Euro Cylinder Locks The multi-point locking mechanism is located in the door frame and connected to the cylinder locks (also called door barrels). They are also used in internal glazed doors and conservatories. They provide the highest security level, but are vulnerable to attacks like lock snapping or bumping. It is therefore important to secure your uPVC door before going to go to bed or leaving your house. Before purchasing, it is crucial to decide which cylinder lock best suits your requirements. For instance, you should consider the frequency you lock your uPVC door and if you want a keyed alike system whereby all of your doors can be opened by the same key. The euro cylinder is the most common type of cylinder. It is found on the majority of uPVC doors. These are usually made of brass and are available in a variety of sizes to fit the majority of doors. The biggest models are typically used for the front and back door on larger properties. When selecting a euro cylinder, it is crucial to confirm that it has been tested according to the proper kitemark standards - they are SS312 Diamond Approved or TS 007 3 star and offer protection against Picking, Drilling Bumping, Snapping and Picking. Cylinder locks are available in various lengths and some have offset. This means that they can only close from the inside after they've been closed by turning the handle up. It is also essential to think about the amount you're willing to pay on your uPVC door lock because the cost will differ based on the level of security that you require as well as the features that you wish for your new cylinder to include. When replacing a cylinder lock, it is important to measure the door to make sure that the new cylinder will fit properly. To accomplish this, first locate the screw fixing cylinder typically a large-headed screw inline with the lower end of the cylinder, and then take it off. Next find the cylinder on the door and take a measurement from the edge of the lock face to the center of the screw hole, this is your measurement A. Then, measure from the edge of the door to the centre, including furniture and this is your measurement B. Make sure you compare A and B to make sure that you have measured correctly. uPVC Multipoint Locks The most secure lock for your uPVC or composite door is a multipoint locking system. these are long strip locks that extend the length of the door and have multiple bolts and hooks that lock into place when the handle is turned. They provide greater security for your home and come in various styles to fit all door types and tastes. uPVC multipoint locks are the type of lock you will find on the majority of brand new uPVC doors, as well as on the majority of timber and composite doors. The multipoint lock resists this attack, unlike Euro Cylinder locks that are prone to "lock snapping". This is because the locking points on a multipoint system are linked by a steel bar which stops the rollers and hooks from dispersing without taking the key out of the cylinder. The majority of new uPVC and composite doors have an anti-snap multipoint lock fitted as standard, should you be concerned that yours might not, then you should have the lock checked by a local locksmith. The lock can be identified by opening the door and looking at the keep (the metal strip which runs along the length of the door) to see the brand's logo, ERA, Avocet, Fuhr or Mila are the most common manufacturers. You will need to either employ a lever lever to the lock or turn the key several times to activate the locking points. This is called winding up the lock. Once https://www.repairmywindowsanddoors.co.uk/birmingham-window-lock-repairs-near-me/ locking points have been engaged and locked, you can utilize the lever to open and close the doors. the key deadlocks it. This throws out the deadbolt, which is located in the central gearbox. When it comes time to replace your uPVC or composite front door lock, it's recommended to purchase from an established company that specialises in windows and doors, as the locks that are used on these products play an important part in protecting your home and family. A cheap replacement for a multipoint lock is unwise when the security and locks quality of your new doors aren't up to the standards needed. This will not only put your family at risk but also affect the cost of insurance. uPVC Rim Locks There are many types of uPVC rim locks. The most basic rim lock a slam-close lock. As you shut the door, it automatically locks. You can also purchase one that you have to manually lock using the key before leaving the house. These locks aren't able to be pulled open and are one of the more secure options that you can fit to your door. They are suitable for wooden/timber doors for domestic homes and glass panelled doors for commercial buildings. You can even have these locks approved to the new British standard BS3621, so that your insurance company can offer a discount on your premium. The multi-point locks used on uPVC and composite doors are extremely secure and offer the highest level of security on your home. These locks have multiple locking points so that if you attempt to force the handle open, it won't open. They are also designed to make it difficult for burglars to break through the handles, so that they can't retract the latch from the outside. These locks can be installed with a mortice lock to provide extra protection against people breaking through the window. These locks are perfect for doors that lead into outbuildings or gardens, since they are extra secure against those who climb through windows to gain entry. If you are worried about your uPVC door or composite door snapping and snapping, we can put in an anti-snaplock that will stop this from happening. We use them on our composite doors, and are the only uPVC installation company in Belvedere to provide this. If you'd like to have your locks changed out of hours then it is possible to do so as we have a mobile van that can visit your property. The cost for locksmiths is slightly higher than when we are working during the day, but it is worth the added cost for the security and peace of mind of having your uPVC door locks changed outside of business hours.