https://www.selleckchem.com/products/ru-521.html 4209 to 13959. In the case of water content, the sample with 5% Hyaluronic acid and MA added slightly increased to 41.01%. In the case of Graphene oxide nanocolloids added, 48.76%~53.56% of Graphene oxide nanocolloids were added. Especially, it was observed that the water content increased sharply in the 0.1% sample of Graphene oxide nanocolloids. When the amount of graphene oxide nanocolloids added to the contact lens material was increased, the refractive index, which is a basic physical property, gradually decreased as the contact lens material was added together with Hyaluronic acid, MA, and Graphene oxide nanocolloids added as a nanomaterial. The water content tended to increase gradually. Therefore, the combination of Graphene oxide and hydrophilicmaterials shows a synergistic effect of physical properties, which is considered to be suitable as a material for contact lenses.Nitrogen-enriched reduced graphene oxide electrode material can be successfully prepared through a simple hydrothermal method. The morphology and microstructure of ready to use electrode material is measured by field emission scanning electron microscopy (FESEM), high-resolution transmission electron microscopy (HRTEM) and X-ray diffraction (XRD). Physical characterizations revealed that nitrogen-enriched reduced graphene oxide electrode material possessed high specific surface area of 429.6 m² · g-1, resulting in high utilization of electrode materials with electrolyte. Electrochemical performance of nitrogen-enriched reduced graphene oxide electrode was also investigated by cyclic voltammetry (CV), galvanostatic charge/discharge measurements and electrochemical impedance spectroscopy (EIS) in aqueous in 6 M KOH with a three-electrode system, which displayed a high specific capacitance about 223.5 F · g-1 at 1 mV · s-1. More importantly, nitrogenenriched reduced graphene oxide electrode exhibited outstanding stability with 100% coulombic eff