https://www.selleckchem.com/products/2-Methoxyestradiol(2ME2).html Cr(VI) compounds at high temperature usually tend to decompose and reduce into Cr(III) due to thermodynamically instability for Cr(VI). This study found Cr(VI) could be reduced into Cr(V) instead of Cr(III) in the presence of CaO during heating solid waste containing Cr(VI). CaCrO4 is prepared and mixed with CaO as simulated solid waste containing Cr(VI). It was found that CaCrO4 reacted with CaO and formed a new product Ca5(CrO4)3O0.5 at temperature range of 800 and 1000 °C. The valence state of Cr in Ca5(CrO4)3O0.5 is determined to be +5 b y XPS analysis, and the color for new formed Cr(V) is observed in green, similar to Cr(III) compounds. The temperature and CaO are two keys to arouse the reduction reaction of Cr(VI) into Cr(V). In particular, the reduction of Cr(VI) into Cr(V) is strongly depended on temperature (800-1000 °C), this reaction can be balanced within 10 min, while prolonging sintering time has little help for promoting the reduction of Cr(VI) to Cr(V). Additionally, it was found Cr(V) can keep stable and not be re-oxidized into Cr(VI) at 800-1000 °C. Above results offers some new understanding and knowledge about the formation of Cr(V) in presence of much CaO or CaCO3 during heating solid waste containing Cr(VI).In this work, Lysinibacillus sp. JLT12 was used to remove the Cr(VI)-induced passive layer on the magnetite. Mechanism study via dynamic kinetics, X-ray diffraction, Raman spectroscopy, and X-ray photoelectron spectroscopy analyses revealed that Lysinibacillus sp. JLT12 could remove the passive layer (lepidocrocite and goethite) to facilitate the further Cr(VI) reduction by magnetite. For large-scale applications, porous ceramsite (PC) was prepared with magnetite, kaolin, and fallen leaves. Lysinibacillus sp. was then immobilized on the holes in PC. Slow-released nutrients were added to immobilized porous ceramsite (IM-PC) at a ratio of 1.510 (g/g) to supply carbon, nitrogen