Additionally, a porosity model derived from movable fluids using NMR data has been established and provided better prediction effect compared with the classic Coates and Schlumberger Doll Research (SDR) models. Fractal analysis and permeability estimation are shown to be quite effective for investigating microscopic behaviors and in predicting the reservoir quality of low-permeability sandstone reservoirs.Glycidyl methacrylate (GMA) and a mixture of alkyl methacrylates (average chain length of 13 carbons; termed C13MA; derived from vegetable oils) were copolymerized by nitroxide-mediated polymerization to form epoxidized statistical and block copolymers with similar compositions (F GMA ∼0.8), which were further cross-linked by a bio-based diamine. Hybrid plate-like nanoparticles containing organophosphorus-titanium-silicon (PTS) with an average size of ∼130 nm and high decomposition temperature (485 °C) were synthesized via a hydrothermal reaction to serve as additives to simultaneously enhance the thermal and mechanical properties of the blend. Nanocomposites filled with PTS were prepared at different filler-loading levels (0.5, 2, 4 wt %). Transmission electron microscopy (TEM) of the cured block copolymer displayed reaction-induced macrophase-separated domains. TEM also showed an effective dispersion of PTS hybrids in the matrix without intense agglomeration. Thermogravimetric analysis at different heating rates revealed the activation energy of poly (GMA-stat-C13MA) at maximum decomposition increased from 143.5 to 327.2 kJ mol-1 with 4 wt % PTS. Decomposition temperature and char residue improved 12 °C and ∼7 wt %, respectively, and T g increased 12 °C by adding 4 wt % PTS. Targeting various PTS concentrations enabled tuning of the tensile modulus (up to 75%), tensile strength (up to 46%), and storage modulus in both glassy state (up to 59%) and rubbery plateau regions (up to 88%). Oscillatory frequency sweeps indicated that PTS makes the storage modulus frequency dependent, suggesting that the inclusion of the nanoparticles alters the relaxation of the surrounding matrix polymer.Ovarian cancer is highly aggressive and has high rates of recurrence and metastasis. Due to the limited effects of current treatments, it is necessary to conduct research and develop new treatment options. The application of gene therapy in tumor therapy is gradually increasing and has exciting prospects. MicroRNA-7 (miR-7) has been reported to inhibit the growth, invasion, and metastasis of a variety of solid tumors. Cationic liposomes are safe and effective gene delivery systems for transfection in vivo and in vitro. To realize the application of miR-7 in the treatment of ovarian cancer, cationic liposomes were prepared with 1,2-dioleoyl-3-trimethylammonium-propane, 1,2-dioleoyl-sn-glycero-3-phosphoethanolamine, and cholesterol. The miR-7 liposomes had a suitable particle size, potential, and a high cellular uptake rate. MiR-7 encapsulated by liposomes could be effectively delivered to ovarian cancer cells and successfully targeted to the tumor site in a mouse xenograft model of ovarian cancer. In vitro and in vivo experiments revealed that the miR-7 liposomes had a significant ability to inhibit the growth, invasion, and migration of ovarian cancer, probably by inhibiting the expression of the epidermal growth factor receptor. Our studies of miR-7 liposomes demonstrated a safe and efficient microRNA delivery system for the gene therapy of ovarian cancer.The high thermal conductivity, high electron mobility, the direct wide band gap, and large exciton binding energy of zinc oxide (ZnO) make it appropriate for a wide range of device applications like light-emitting diodes, photodetectors, laser diodes, transparent thin-film transistors, and so forth. Among the semiconductor metal oxides, zinc oxide (ZnO) is one of the most commonly used gas-sensing materials. The gas sensor made of nanocomposite ZnO and Ga-doped ZnO (ZnOGa) thin films was developed by the sol-gel spin coating method. The gas sensitivity of gallium-doped ZnO thin films annealed at 400, 700, and 900 °C was studied for ethanol and acetone gases. The variation of electrical resistance of gallium-doped ZnO thin films with exposure of ethanol and acetone vapors at different concentrations was estimated.  https://www.selleckchem.com/products/vo-ohpic.html  GaZnO thin films annealed at 700 °C show the highest sensitivity and shortest response and recovery time for both ethanol and acetone gases. This study reveals that the 5 at. % Ga-doped ZnO thin film annealed at 700 °C has the best sensing property in comparison to the film annealed at 400 and 900 °C. The sensing response of ZnOGa thin films was found higher for ethanol gas in comparison to acetone gas.Nickel and tungsten, combined with copper, were incorporated into a magnesium aluminum spinel to form a multifunctional catalyst (Ni-W-Cu/MgAl2O4). Characterization results suggested that the adjacent Cu not only facilitated the reduction of W6+ to W5+ with substantial oxygen vacancies but also promoted the reducibility of the Ni species. Besides, the incorporation of Ni, W, and Cu into the support enhanced the catalytic acidity, as well as the L acid sites. The catalyst exhibited a strong synergistic effect between the three metals and the support, resulting in higher catalytic activity for the one-pot hydrogenolysis of cellulose to ethylene glycol. High cellulose conversion (100%) and ethylene glycol yield (52.8%) were obtained, even under a low H2 pressure of 3 MPa.Xanthine oxidase (XO), which can catalyze the formation of xanthine or hypoxanthine to uric acid, is the most important target of gout. To explore the conformational changes for inhibitor binding, molecular dockings and molecular dynamics simulations were performed. Docking results indicated that three inhibitors had similar pose binding to XO. Molecular dynamics simulations showed that the binding of three inhibitors influenced the secondary structure changes in XO. After binding to the inhibitor, the peptide Phe798-Leu814 formed different degrees of unhelix, while for the peptide Glu1065-Ser1075, only a partial helix region was formed when allopurinol was bound. Through the protein structure analysis in the simulation process, we found that the distance between the active residues Arg880 and Thr1010 was reduced and the distance between Glu802 and Thr1010 was increased after the addition of inhibitors. The above simulation results showed the similarities and differences of the interaction between the three inhibitors binding to the protein.