Tilt and Slide Patio Door Repairs A tilt and slide patio doors that works well brings light and fresh air into your home, and allows for effortless movement from indoors to outdoors. Modern aluminium doors provide strength and durability and thermal integrity, and an array of glass options that can be adapted to a wide range of aesthetics. Dirty tracks and rollers are the most common cause of sliding door problems. Cleaning and regular lubrication of these moving parts can ensure that your door functions well. Track and Roller Replacement The track and rollers are crucial for sliding doors to function. They are housed within the bottom of the aluminum door panel. They are mounted on a track that helps them open and close. Over time, dirt can cause the tracks to get blocked and cause the rollers to be damaged. Cleaning your patio door and well-lubricated can help prevent these issues. If your track isn't severely bent, it is usually possible to repair the track and rollers, without removing the door. Get a helper and tilt the panel towards you to lift it off the bottom track (Photo 3). It may take some effort as the panels can be quite heavy. After removing https://www.repairmywindowsanddoors.co.uk/patio-door-repairs-cheltenham/ place it flat on sawhorses, then examine the rollers. If they are damaged, replace them with a new assembly. You can also adjust the height of the rollers by turning the adjustment screwsusually located in slots on the edge of the door panel. If the rollers are in good shape they might require to be cleaned or lubricated. Remove the rollers with the help of a screwdriver, and then clean them using denatured ethanol. This will get rid of any caked-on dirt and grime that might be causing resistance. Then, gently place each roller back into its slot, and then fully retract it by using the adjustment screw. Finally, lubricate the rollers using a silicone spray. This type of lubricant won't hold dirt like petroleum-based ones and will make your door glide smoothly. After cleaning the rollers and reinstalling them you can reinstall the door and test it to make sure the track is aligned with the rollers and the doors are smoothly sliding. If you have any additional issues, call a local door dealer for assistance. Cleaning your doors and keeping them lubricated can make them last longer and lessen the need for repairs. We recommend a silicone lubricant since it does not draw dirt as WD-40. It is recommended to grease your tracks and rollers at least once every month. Insect Screen Replacement Patio doors that slide open are a great way to maximize floor space, allow airflow and allow in beautiful panoramic views. However, they can also be difficult if their mechanism ceases working or is not functioning properly. Luckily, most problems with sliding screen doors are easily solved. Dirty rollers due to debris in the track or a wrinkled window are among the most frequent issues. However you can fix them by following these easy steps. If your screen is sliding or wrinkling, you should first place the frame on an unfinished work surface. Then slip a 1x4 block under each end, forming some slight bows in the middle. This will allow you to pull the screen tighter and straighten it. Buy a screen that's at least two inches larger in both directions than the frame's opening. This will allow you to have room to trim off any excess. Finally make use of a spline roller tool to push the rubber spline end into the channel. Once you've completed this, it is time to add the rest of your spline. Adjusting the Panel The tilt and slide mechanism lets you open the patio doors wider to let in more air and keeps your pets, children and other household members away. Despite the ease of the system, the doors tend to take more force than expected and, over time, this leads to increased friction, crooked tracks or misalignments which could cause the door to fail. The early detection of problems and minor adjustments can usually solve these issues, and reduce the cost of replacing hardware. The first step for adjust a tilt-and-slide patio door is to remove the panels. Set it on a flat surface. After removing the panels use a screwdriver and remove the plastic caps that are in the holes of each adjustment roller. Once these are removed, the adjuster can be coaxed out of its channel by using the long shaft screwdriver. After removing the adjuster, clean it using denatured or rubbing alcohol. This will remove any grit that is hindering the roller to easily retract into its channel once the process is complete. When reinstalling an movable panel align it with the frame and then use the drill to drive the screws through the flange. The flange needs to be securely secured to the door's edge while ensuring the flaps are aligned correctly. After the movable panels are in place, apply silicone-based lubricant on the top track block connectors for the arm and the lead Bogie wheels and the slave Bogie wheels and replace the hole cap made of plastic. Repeat the procedure for the other two panels that can be moved to restore their slide functionality. Install the plastic flanges. Using a plastic adhesive, attach the jamb-side strip to its fixed panel. Once the glue is dry reconnect the handle and check for smooth operation. If the problem persists then adjust the lead Bogie by taking it off and cleaning it before replacing it with a silicone-based oil. Charley Bar Installation A patio door is a great means to let your pets in and out of the house, but it can also be a convenient entry point for burglars. You can take steps to improve the security of your patio door by installing pin locks or the Charley bar. These locks provide a blend of security and convenience that is unrivaled by any other product available. The bar charley is a fantastic option for your sliding glass door, and is easy to install at your home. The charley bar is installed in the middle of your door and prevents the patio door from being jimmied open with tools or other items, like a hockey stick or broom handle. The charley bar is made of polycarbonate injection-molded and extruded RPVC tubes that telescoping, making it strong and durable. The installation of the charley bar requires that you first measure the length of the bar from the edge the track for sliding doors to the sliding patio door. Then, mark the areas where the charley bar is going to be installed using a pencil. Utilize a drill bit that is 8 inches to drill holes into the wall jamb and frame of the patio door, being cautious not to cut through the patio door glass. Finally, put the screws that came with the charley bar and secure them. The Charley bar is a great option for sliding glass patio doors and windows with sash. This simple security device will keep your sliding patio door safe and burglar proof for a long time. It is made of injection-molded polycarbonate and has been tested to withstand over 400 pounds of pressure by Intertek. The charley bar is locked with the key included. It's easy to install and stays out of the way when it's not in use. Most hardware stores carry a charley-bar. However, if you want to buy one that is sure to perform, consider purchasing a charley bars from an online retailer.