The new method proposed in this study provides an alternative approach for assessing runoff pollution control efficiency of different VFF.The horizontal subsurface flow constructed wetland (HFCW) is widely studied for the treatment of wastewater containing emerging organic contaminants (EOCs) pharmaceuticals, personal care products, and steroidal hormones. This study evaluates the performance of HFCW for the removal of these types of EOCs based on the data collected from peer-reviewed journal publications. In HFCW, anaerobic biodegradation is an important removal mechanism of EOCs besides their removal by the filter media (through sedimentation, adsorption, and precipitation) and plant uptake. The average removal efficiency of 18 selected EOCs ranged from 39% to 98%. The moderate to higher removal efficiency of 12 out of 18 selected EOCs in HFCW indicates the suitability of this type of constructed wetland (CW) for the treatment of wastewater containing these EOCs. The reasonably good removal (>50% in most of the cases) of these EOCs in HFCW might be due to the occurrence of anaerobic biodegradation as one of their major removal mechanisms in CWs. Although the effluent concentration of EOCs was substantially decreased after the treatment, the environmental risk posed by them was not fully reduced in most of the cases. For instance, estimated risk quotient of 11 out of 18 examined EOCs was extremely high for the effluent of HFCW.In this work, mixed oxides of LaxCa1-xMnO3 perovskite type (x = 0, 0.5 and 1.0) were synthesized through modified proteic method using collagen and calcination process at 700 °C/2 h in order to remove the commercial textile dye Bezaktiv Blue S-MAX from water. Oxides were characterized using X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), N2 physisorption, scanning electron microscopy (SEM) and point of zero charge (PZC) techniques while the dye only by the first two techniques. The XRD showed that perovskite monophase was obtained for x = 0.5 and 1.0.  https://www.selleckchem.com/products/bx-795.html  However, for x = 0, the low crystalline perovskite phase was obtained in the midst of precursor oxides. FTIR showed the adsorption process did not damage the adsorbents structure. The successful obtained materials have meso and macroporous with slit or cavity shape, rough surface and particles with varying sizes. The pseudo-second-order model was the one that best fit the kinetic data. The process must occur through electrostatic surface interactions between the adsorbent surface and the dye molecule. For the equilibrium study, Langmuir isotherm is the most suitable when using LaMnO3 adsorbent, while Freundlich isotherm was better suited when used the other two materials. The adsorbents were termally regenerated and reused five times. The best performance was exhibited by LaMnO3.The objective of the present study is to investigate the different effects on the oxygen transfer of fine-bubble aeration systems in saline water. Compared to tap water, oxygen transfer increases due to the inhibition of bubble coalescence. In Part I of the present study, we investigated in laboratory-scale experiments the effect of design of diffuser membrane. The objective of Part II is the assessment of effects of different salts, diffuser type and diffuser density. We measured the concentration of various salts (MgCl2; CaCl2; Na2SO4; NaCl; KCl) above which coalescence is fully inhibited and oxygen transfer reaches its maximum (referred to as the critical coalescence concentration; CCC). For this purpose, we developed a new analytical approach, which enables investigation of the coalescence behaviour of any aeration system and (mixed) salt solution quickly and easily by evaluating the results of oxygen transfer tests. To investigate the transferability to large scale and the effect of diffuser type and density, we repeated lab-scale experiments in a 17,100 L pilot-scale test tank and carried out additional tests with tube and plate diffusers at different diffuser densities. The results show that despite the higher pressure drop, diffusers with dense slit density and smaller slits are to be recommended in order to improve efficiency of aeration systems in saline water.Degradation activity of plasma catalysis between dielectric barrier discharge (DBD) and carbon nanotubes-graphene-nickel foam (CNTs-G-Nif) has been studied in treatment of dye wastewater. CNTs-G-Nif was prepared through a two-step chemical vapor deposition (CVD) approach. The composite has been characterized by different techniques such as X-ray diffraction (XRD), scanning electron microscope (SEM) and Raman spectroscopy. SEM results showed that the Nif as the growth substrate was evenly wrapped by G and then CNTs were successfully grown on G as the support. The growth mechanism of composite was proposed. The possible coupled catalytic mechanism between DBD and CNTs-G-Nif were addressed. In addition, the modification on G-Nif was found by SEM during the discharge process in liquid phase. And the modification mechanism of DBD plasma (DBDP) acting on composites was discussed. Finally, by means of analyses of ultraviolet-visible (UV-Vis) spectroscopy, Fourier transform infrared (FT-IR) spectroscopy, gas chromatography-mass spectrometry (GC-MS) and liquid chromatography-mass spectrometry (LC-MS), the general degradation pathway and stepwise degradation pathways of alizarin green (AG) were proposed in detail.Heterogeneous photocatalysis using nanocomposites is of great research interest in the treatment of industrial wastewater. The impregnated photocatalyst was produced by liquid state reaction of ZnO/CuO nanocomposite with extracted eggshells. The structure, functional group, metal composition, bandgap, and photocatalytic activity of the nanocomposites were characterized by using X-ray diffraction, Fourier-transform infrared spectroscopy, atomic absorption spectrometry, and UV-Vis spectroscopy, respectively, in the absence and presence of eggshells. Photocatalytic degradation activities of the nanocomposites under UV light irradiation have been tested for a real sewage sample taken from Debre Berhan Textile Industry. From the results, the optimized degradation efficiency of the dye was 97.95% with 0.4 g dose of the photocatalyst, 120 min irradiation time, 120 °C temperature, and pH of 6.7. The results revealed that eggshell impregnated nanocomposite had better catalytic activity than the naked nanocomposite. This is due to the highly porous structure of eggshell biomasses and their sorption characteristics.