https://www.selleckchem.com/products/azd5363.html Three foods that did not pass Food Code cooling times were identified by the two-point model as having marginal cooling rates. Ten of 12 foods identified by the two-point model as having acceptable cooling rates met Food Code cooling times. Most (six of eight) foods that were considered to have atypical cooling curves failed to meet the Food Code cooling times. The two-point model was also able to determine whether these foods would fail based on Food Code guidelines depending upon the simulation criteria used. Our data show that food depth has a strong influence on cooling rate. Containers with a food depth ≥7.6 cm (3 in.) were more likely to have cooling rates slower than the U.S. Food and Drug Administration Model Food Code cooling rate. This analysis shows that the two-point method can be a useful screening tool to identify potential cooling rate problems during a routine restaurant inspection visit. Traditional feed composition tables have been a useful tool in the field of animal nutrition throughout the last 70 yr. The objective of this paper is to discuss the challenges and opportunities associated with creating large feed ingredient composition tables. This manuscript will focus on three topics discussed during the National Animal Nutrition Program (NANP) Symposium in ruminant and nonruminant nutrition carried out at the American Society of Animal Science Annual Meeting in Austin, TX, on July 11, 2019, namely 1) Using large datasets in feed composition tables and the importance of standard deviation in nutrient composition as well as different methods to obtain accurate standard deviation values, 2) Discussing the importance of fiber in animal nutrition and the evaluation of different methods to estimate fiber content of feeds, and 3) Description of novel feed sources, such as insects, algae, and single-cell protein, and challenges associated with the inclusion of such feeds in feed composition tableurces fr