Transcription factor (TF)-based metabolite detection mainly depends on TF-regulated gene expression in cells. From TF activation to gene transcription and translation, the signal travels a relatively long way before it is received. Here, we propose a TF-splinting duplex DNA nanoswitch to detect metabolites. We show its feasibility using tryptophan repressor (TrpR) to detect l-tryptophan as a model. The assay has been optimized and characterized after obtaining a proof of concept, and the detection of l-tryptophan in complex biological samples is feasible. Unlike an equivalent gene expression approach, the whole process is a single-step, enzyme-free, and signal-on method. It can be completed within 20 min. This proposed TF-splinting duplex has the potential to be applied to the quick and convenient detection of other metabolites or even TFs.The label-free assay has drawn extensive attention because it does not require a labeling step and enables direct interaction and signal transduction between the sensing unit and target analytes. Herein, we demonstrate a proof-of-principle concept of a label-free and visualized nanoplasmonic strategy for silver ions sensing, where only Ti3C2 MXenes are employed by exploring their excellent adsorption affinity and reductive property toward metal ions. Ag+ was adsorbed onto the surface of Ti3C2 MXene nanosheets, followed by the Ti3C2 MXenes mediated in situ silver nanoparticles (Ag NPs) generation without adding any extra stabilizing or reducing agent. The excellent localized surface plasmon resonances at a particular wavelength provide Ag NPs the capability for colorimetric assay with a detection limit of 0.615 μM. With the assistance of a smartphone, RGB analysis exhibited visualized results consistent with the results measured on a UV-vis spectrometer, promising a budget, simple-operating on-site detection. Moreover, the detection of Ag+ in real samples was achieved with satisfactory results meeting the analysis demand for the Drinking Water Standards of the World Health Organization (WHO) and the United States Environmental Protection Agency (U.S. EPA). These results reveal that Ti3C2 MXenes possess great potential in building convenient label-free colorimetry nanoplatforms and may evoke more inspirations to explore strategies for the direct sensing of analytes.A luminescent spectral ruler was developed to measure micrometer to millimeter displacements through tissue. The spectral ruler has two components a luminescent encoder patterned with alternating stripes of two spectrally distinct luminescent materials and an analyzer mask with periodic transparent windows the same width as the encoder stripes. The analyzer mask is placed over the encoder and held so that only one type of luminescent stripe is visible through the window; sliding the analyzer over the encoder modulates the luminescence spectrum acquired through the analyzer windows, enabling detection of small displacements without imaging. We prepared two types of spectral rulers, one with a fluorescent encoder and a second with an X-ray excited optical luminescent (XEOL) encoder. The fluorescent ruler used two types of quantum dots to form stripes that were excited with 633 nm light and emitted at 645 and 680 nm, respectively. Each ruler type was covered with chicken breast tissue to simulate implantation. The XEOL ruler generated a strong signal with negligible tissue autofluorescence but used ionizing radiation, while the fluorescence ruler used non-ionizing red light excitation but required spectral fitting to account for tissue autofluorescence. The precision for both types of luminescent spectral rulers (with 1 mm wide analyzer windows, and measured through 6 mm of tissue) was less then 2 μm, mostly limited by shot noise. The approach enabled high micrometer to millimeter displacement measurements through tissue and has applications in biomechanical and mechanochemical measurements (e.g., tracking postsurgical bone healing and implant-associated infection).Self-rolling of a planar hydrogel sheet represents an advanced approach for fabricating a tubular construct, which is of significant interest in biomedicine. However, the self-rolling tube is usually lacking in remote controllability and requires a relatively tedious fabrication procedure. Herein, we present an easy and controllable approach for fabricating self-rolling tubes that can respond to both magnetic field and light. With the introduction of magnetic nanorods in a hydrogel precursor, a strain gradient is created across the thickness of the formed hydrogel sheet during the photopolymerization process. After the removal of the strain constraint, the nanocomposite sheet rolls up spontaneously. The self-rolling scenario of the sheet can be tuned by varying the sheet geometry and the magnetic nanorod concentration in the hydrogel precursor. The nanocomposite hydrogel tube translates in the presence of a magnetic field and produces heat upon a near-infrared (NIR) light illumination by virtue of the magnetic and photo-thermal properties of the magnetic nanorods. The self-rolling tube either opens up or expands its diameter under NIR light irradiation depending on the number of rolls in the tube. With the use of a thermo-responsive hydrogel material, we demonstrate the magnetically guided motion of the chemical-bearing nanocomposite hydrogel tube and its controlled chemical release through its light-mediated deformation.  https://www.selleckchem.com/products/AdipoRon.html  The approach reported herein is expected to be applicable to other self-rolling polymer-based dry materials, and the nanocomposite hydrogel tube presented in this work may find potential applications in soft robot and controlled release of drug.Inorganic lead halide perovskite nanostructures show promise as the active layers in photovoltaics, light emitting diodes, and other optoelectronic devices. They are robust in the presence of oxygen and water, and the electronic structure and dynamics of these nanostructures can be tuned through quantum confinement. Here we create aligned bundles of CsPbBr3 nanowires with widths resulting in quantum confinement of the electronic wave functions and subject them to ultrafast microscopy. We directly image rapid one-dimensional exciton diffusion along the nanowires, and we measure an exciton trap density of roughly one per nanowire. Using transient absorption microscopy, we observe a polarization-dependent splitting of the band edge exciton line, and from the polarized fluorescence of nanowires in solution, we determine that the exciton transition dipole moments are anisotropic in strength. Our observations are consistent with a model in which splitting is driven by shape anisotropy in conjunction with long-range exchange.