The combination of probabilistic shaping (PS) technology and forward error correction (FEC) technology can significantly boost the performance of a transmission system. In this paper, we propose a probabilistic shaping distribution matching algorithm employing uneven segmentation for data center optical networks, while keeping extremely low computational complexity for both encoding and decoding.  https://www.selleckchem.com/products/g150.html  Based on the proposed probabilistic shaping distribution matching algorithm, we develop a novel integrated scheme of PS and FEC coding that lifts the restrictions on the use of FEC technology and increases the use of interleaver. An experiment used to evaluate the probabilistically shaped data transmission is successfully conducted over a 25 km standard single-mode fiber (SSMF) with 16 quadrature amplitude modulation (16-QAM). Simultaneously, we use a simulation software to analyze the bit error rate performance at higher resolution. The results show that the joint coding scheme can achieve a 0.4dB performance improvement compared with the single FEC system.Potential applications of terahertz (THz) radiation are constantly being investigated for high-speed communication due to its large bandwidth. For example, frequency hopping communication technology would benefit from the large bandwidth. To attach the information to the carrier wave, THz modulators with deep and stable modulation at different frequencies are crucial, yet are still lacking. Here a THz modulator, designed by integrating a non-resonant field enhancement effect of periodic metal microslits to assist a Fabry-Perot resonance structure (MS-FP) is proposed and demonstrated. New equations are developed to describe the superior performance of the novel design. The >95% modulation depth is achieved by a SiO2/Si gated graphene device at 14 Fabry-Perot resonant frequencies across 1.4 THz bandwidth, outperforming the recently reported 75% modulation depth THz modulator with a similar Fabry-Perot structure.Graphene plasmons, the electromagnetic waves coupled to charge excitations in a graphene sheet, have attracted great interest because of their intriguing properties, such as electrical tunability, long plasmon lifetime, and high degree of spatial confinement. They may enable the manufacture of novel optical devices with extremely high speed, low driving voltage, low power consumption and compact sizes. In this paper, we propose a graphene-based metasurface which can support a topologically protected graphene plasmon mode with the ability of ultrastrong field localization. We show that such a plasmonic metasurface, constructed by depositing a graphene sheet on a periodic silicon substrate, would exhibit different bandgap topological characteristics as the filling factor of the periodic substrate changes. By setting suitable Fermi levels of graphene at two different areas of the metasurface, topological interface plasmon modes can be excited, resulting in over 8 orders of magnitude enhancement of the plasmon intensity. The topologically protected plasmon mode is robust against the perturbation of the structural parameters, and its frequency can be tuned by adjusting the gate-voltage on the graphene sheet. This highly integrated platform could provide a pathway for low-power and actively controllable nonlinear optics.In this study, surface-enhanced Raman scattering (SERS) scheme is combined with localized surface plasmon resonance (LSPR) detection on a thin gold film with stripe patterns of gold nanoparticles (GNPs) via convective self-assembly (CSA) method. The potential of dual modal plasmonic substrates was evaluated by binding 4-ABT and IgG analytes, respectively. SERS experiments presented not only a high sensitivity with a detection limit of 4.7 nM and an enhancement factor of 1.34 × 105, but an excellent reproducibility with relative standard deviation of 5.5%. It was found from plasmonic sensing experiments by immobilizing IgG onto GNP-mediated gold film that detection sensitivity was improved by more than 211%, compared with a conventional bare gold film. Our synergistic SERS-LSPR approach based on a simple and cost-effective CSA method could open a route for sensitive, reliable and reproducible dual modal detection to expand the application areas.β-Ga2O3 is a new type of fast scintillator with potential applications in medical imaging and nuclear radiation detection with high count-rate situations. Because of the severe total internal reflection with its high refractive index, the light extraction efficiency of β-Ga2O3 crystals is rather low, which would limit the performance of detection systems. In this paper, we use hollow nanosphere arrays with a high-index contrast to enhance the light extraction efficiency of β-Ga2O3 crystals. We can increase the transmission diffraction efficiency and reduce the reflection diffraction efficiency through controlling the refractive index and the thickness of the shell of the hollow nanospheres, which can lead to a significant increase in the light extraction efficiency. The relationships between the light extraction efficiency and the refractive index and thickness of the shell of the hollow nanospheres are investigated by both numerical simulations and experiments. It is found that when the refractive index of the shell of the hollow nanospheres is higher than that of β-Ga2O3, the light extraction efficiency is mainly determined by the diffraction efficiency of light transmitted from the surface with the hollow nanosphere arrays. When the refractive index of the shell is less than that of β-Ga2O3, the light extraction efficiency is determined by the ratio of the diffraction efficiency of the light transmitted from the surface with the hollow nanosphere arrays to the diffraction efficiency of the light that can escape from the lateral surface.Light-sheet fluorescence microscopy (LSFM) facilitates high temporal-spatial resolution, low photobleaching and phototoxicity for long-term volumetric imaging. However, when a high axial resolution or optical sectioning capability is required, the field of view (FOV) is limited. Here, we propose to generate a large FOV of light-sheet by scanning multiple focus-shifted Gaussian beam arrays (MGBA) while keeping the high axial resolution. The positions of the beam waists of the multiple Gaussian beam arrays are shifted in both axial and lateral directions in an optimized arranged pattern, and then scanned along the direction perpendicular to the propagation axis to form an extended FOV of light-sheet. Complementary beam subtraction method is also adopted to further improve axial resolution. Compared with the single Gaussian light-sheet method, the proposed method extends the FOV from 12 μm to 200 μm while sustaining the axial resolution of 0.73 μm. Both numerical simulation and experiment on samples are performed to verify the effectiveness of the method.