https://www.selleckchem.com/products/nvp-tnks656.html Heavy liquid metals such as lead and lead bismuth eutectic (LBE) are considered as spallation target material for next-generation neutron sources and as coolant of fast spectrum nuclear reactors that are developed to facilitate more efficient use of nuclear fuel as well as transmutation of long-lived nuclear waste. During the operation of such facilities, the heavy liquid metal will be activated by nuclear reactions. Additionally, fission product radionuclides may be introduced into the liquid metal from leaking fuel pins or by fission of the target nuclei in spallation. The chemical behaviour of these radioactive contaminants in the liquid metal - especially their immediate volatilization or volatilization of formed secondary compounds - may affect the safety of such facilities. The present article summarizes the activities of PSI's Laboratory of Radiochemistry towards a better understanding of the chemistry of potentially hazardous radionuclides in LBE and discusses aspects that need to be addressed in future to support the licensing of heavy liquid metal-based nuclear facilities.Radionuclide production and development has a long history at the Paul Scherrer Institute (PSI) and dates back to the founding times of its forerunner institutions the Federal Institute for Reactor Research and the Swiss Institute for Nuclear Research. The facilities used for this purpose have evolved substantially over the last five decades. Many radiometals in use today, as radiopharmaceuticals, are for the diagnosis and treatment of disease, with the most popular means of detection being Positron Emission Tomography. These positron emitters are easily produced at low proton energies using medical cyclotrons, however, developments at these facilities are lacking. Currently, the fixed 72 MeV proton beam at PSI is degraded at IP2 irradiation station to provide the desired energy to irradiate targets to produce the likes of 44Sc, 43Sc a