https://www.selleckchem.com/products/way-262611.html Full-space metasurfaces (MSs) attract significant attention in the field of electromagnetic (EM) wave manipulation due to their advantages of functionality integration, spatial integration and wide applications in modern communication systems. However, almost all reported full-space metasurfaces are realized by multilayer dielectric cascaded structures, which not only has the disadvantages of high cost and complex fabrication but also is inconvenient to device integration. Thus, it is of great interest to achieve high-efficiency full-space metasurfaces through simple design and easy fabrication procedures. Here, we propose a full-space MS that can efficiently manipulate the circularly polarized (CP) waves in dual frequency bands by only using a single substrate layer, the reflection and transmission properties can be independently controlled by rotating the optimized meta-structures on the metasurface. Our full-space metasurface has the potential to design multifunctional devices. To prove the concept, we fabricate the device and measured it in microwave chamber. For the reflection mode, our metasurface can behave as a CP beam splitter at the frequency of f1 = 8.3 GHz and exhibit high efficiencies in the range of 84.1%-84.9%. For the transmission mode, our metasurface acts as a meta-lens at the frequency of f2 = 12.8 GHz for the LCP incidence, and the measured relative efficiency of the meta-lens reaches about 82.7%. Our findings provide an alternative way to design full-space metasurfaces and yield many applications in EM integration systems.We reduce the intensity noise of laser light by using an electro-optic modulator and acousto-optic modulator in series. The electro-optic modulator reduces noise at high frequency (10 kHz to 1 MHz), while the acousto-optic modulator sets the average power of the light and reduces noise at low frequency (up to 10 kHz). The light is then used to trap single sodium atoms in an o