Boundary integral analysis of scattering from rigid bodies is well known. Analysis often proceeds along the following lines representation of the geometry using a collection of triangles, representation of physics using low order ansatz functions defined on each triangle, and then solving the resulting discrete system. This prescription for the common solution stands out in terms of the low-order approximation of both geometry and representation of physics; specifically, both are C0. Taking inspiration from computer graphics literature, a framework wherein continuity of representation (both geometry and physics) can be as high as C2 is developed. In this paper, the steps necessary to develop such a iso-geometric (i.e., using the same basis functions for representing both geometry and physics) boundary integral solver are elucidated. In doing so, an efficient method based on a wideband fast multipole method to evaluate the required inner products and matrix vector products is proposed and demonstrated. Numerous examples are presented to highlight the benefits of the proposed approach.Individual acoustic parameters of reverberation have the potential to affect both the intelligibility of speech and the degree of perceived reverberation. The current experiments used monaural acoustic simulations to investigate the effect of reverberation time (RT) and direct-to-reverberant ratio (DRR) on word and sentence intelligibility at different levels of analysis (phonemes, words, and sentences). Perceived reverberation and recall of sentences were also assessed. Intelligibility and perceived reverberation decreased with increasing RT and decreasing DRR (particularly between 0 and -10 dB). Results indicate consistent effects of both RT and DRR on the intelligibility and perceived reverberation of words and sentences.This paper investigates the evolution of spectral properties observed in Cuvier's beaked whale (Ziphius cavirostris) click trains recorded by fixed hydrophones in the Gulf of Mexico. In the context of deep water and high-frequency sounds and observed inter-click intervals, the authors assumed that the main effect responsible for the modification of the spectral content between adjacent clicks in the same click train is the source beam pattern. The spectral structure is studied by using the Wigner-Ville time-frequency distribution and is compared with the conventional Fourier spectrogram. The results show that the observed Cuvier's beaked whale clicks are a superposition of upsweep and downsweep chirps, unlike the currently accepted upsweep only structure of beaked whale clicks in bioacoustics literature. The spectral structure variations simulated by using a flat circular piston model as a beam pattern transmission model are consistent with the evolution of spectral click properties observed in experimental data. A better understanding of the properties of observed echolocation clicks of Cuvier's beaked whales will provide useful information for click annotations and, therefore, will contribute to improving accuracy of detecting, classifying, tracking, and estimating the density of Cuvier's beaked whales.Ultrasound computed tomography (USCT) is a noninvasive imaging modality that has shown its clinical relevance for breast cancer diagnostics. As opposed to traveltime inversions, waveform-based inversions can exploit the full content of ultrasound data, thereby providing increased resolution. However, this is only feasible when modeling the full physics of wave propagation, accounting for 3D effects such as refraction and diffraction, and this comes at a significant computational cost.  https://www.selleckchem.com/products/ots964.html  To mitigate this cost, a crosstalk-free source encoding method for explicit time-domain solvers is proposed. The gradient computation is performed with only two numerical "super" wave simulations, independent of the number of sources and receivers. Absence of crosstalk is achieved by considering orthogonal frequencies attributed to each source. By considering "double-difference" measurements, no a priori knowledge of the source time function is required. With this method, full-physics based 3D waveform inversions can be performed within minutes using reasonable computational resources, fitting clinical requirements.Signal-to-noise ratio (SNR) estimation is necessary for many speech processing applications often challenged by nonstationary noise. The authors have previously demonstrated that the variance of spectral entropy (VSE) is a reliable estimate of SNR in nonstationary noise. Based on pre-estimated VSE-SNR relationship functions, the SNR of unseen acoustic environments can be estimated from the measured VSE. This study predicts that introducing a compressive function based on cochlear processing will increase the stability of the pre-estimated VSE-SNR relationship functions. This study demonstrates that calculating the VSE based on a nonlinear filter-bank, simulating cochlear compression, reduces the VSE-based SNR estimation errors. VSE-SNR relationship functions were estimated using speech tokens presented in babble noise comprised of different numbers of speakers. Results showed that the coefficient of determination (R2) of the estimated VSE-SNR relationship functions have absolute percentage improvements of over 26% when using a filter-bank with a compressive function, compared to when using a linear filter-bank without compression. In 2-talker babble noise, the estimation accuracy is more than 3 dB better than other published methods.Advanced acoustic levitation devices featuring flexible, lightweight, wide bandwidth, and film-like transducers based on ferroelectrets are designed and fabricated for sophisticated manipulation of particles in a simple way. Owing to the unique properties of ferroelectret films, such as high piezoelectric activity, very small acoustic impedance, a relatively large damping ratio, flexibility, a large area, and small density, the levitator reported features a wider bandwidth compared to ceramic-based levitators. The transportation of levitated particles is achieved by deformation of the film transducer, which represents a different and promising concept for this task.