No claim to original U.S. Government Works. Distributed under a Creative Commons Attribution NonCommercial License 4.0 (CC BY-NC).Conducting polymer thin films containing inherent structural disorder exhibit complicated electronic, transport, and thermoelectric properties. The unconventional power-law relation between the Seebeck coefficient (S) and the electrical conductivity (σ) is one of the typical consequences of this disorder, where no maximum of the thermoelectric power factor (P = S 2σ) has been observed upon doping, unlike conventional systems. Here, it is demonstrated that a thiophene-based semicrystalline polymer exhibits a clear maximum of P through wide-range carrier doping by the electrolyte gating technique. The maximum value appears around the macroscopic insulator-to-metal transition upon doping, which is firmly confirmed by the temperature dependence of σ and magnetoresistance measurements. The effect of disorder on charge transport is suppressed in the metallic state, resulting in the conventional S-σ relation described by the Mott equation. The present results provide a physical background for controlling the performance of conducting polymers toward the application to thermoelectric devices. Copyright © 2020 The Authors, some rights reserved; exclusive licensee American Association for the Advancement of Science. No claim to original U.S. Government Works. Distributed under a Creative Commons Attribution NonCommercial License 4.0 (CC BY-NC).CuO is the only known binary multiferroic compound, and due to its high transition temperature into the multiferroic state, it has been extensively studied. In comparison to other prototype multiferroics, the nature and even the existence of the high-temperature incommensurate paraelectric phase (AF3) were strongly debated-both experimentally and theoretically-since it is stable for only a few tenths of a kelvin just below the Néel temperature. Until now, there is no proof by neutron diffraction techniques owing to its very small ordered Cu magnetic moment. Here, we demonstrate the potential of spherical neutron polarimetry, first, in detecting magnetic structure changes, which are not or weakly manifest in the peak intensity and, second, in deducing the spin arrangement of the so far hypothetic AF3 phase. Our findings suggest two coexisting spin density waves emerging from an accidental degeneracy of the respective states implying a delicate energy balance in the spin Hamiltonian. Copyright © 2020 The Authors, some rights reserved; exclusive licensee American Association for the Advancement of Science. No claim to original U.S.  https://www.selleckchem.com/products/gdc-0994.html  Government Works. Distributed under a Creative Commons Attribution NonCommercial License 4.0 (CC BY-NC).Thin-film black phosphorus (BP) is an attractive material for mid-infrared optoelectronic applications because of its layered nature and a moderate bandgap of around 300 meV. Previous photoconduction demonstrations show that a vertical electric field can effectively reduce the bandgap of thin-film BP, expanding the device operational wavelength range in mid-infrared. Here, we report the widely tunable mid-infrared light emission from a hexagonal boron nitride (hBN)/BP/hBN heterostructure device. With a moderate displacement field up to 0.48 V/nm, the photoluminescence (PL) peak from a ~20-layer BP flake is continuously tuned from 3.7 to 7.7 μm, spanning 4 μm in mid-infrared. The PL emission remains perfectly linear-polarized along the armchair direction regardless of the bias field. Moreover, together with theoretical analysis, we show that the radiative decay probably dominates over other nonradiative decay channels in the PL experiments. Our results reveal the great potential of thin-film BP in future widely tunable, mid-infrared light-emitting and lasing applications. Copyright © 2020 The Authors, some rights reserved; exclusive licensee American Association for the Advancement of Science. No claim to original U.S. Government Works. Distributed under a Creative Commons Attribution NonCommercial License 4.0 (CC BY-NC).Zeolite nanosheets have shown unprecedented opportunities for a wide range of applications, yet developing facile methods for fabrication of uniform zeolite nanosheets remains a great challenge. Here, a facile approach involving anisotropic etching with an aqueous solution of tetrapropylammonium hydroxide (TPAOH) was developed for preparing uniform high-aspect ratio hierarchical MFI nanosheets. In addition, the mechanism associated with the formation of MFI nanosheets was proposed. In the next step, a dynamic air-liquid interface-assisted self-assembly method and single-mode microwave heating were used for b-oriented MFI nanosheets monolayer deposition and controlled in-plane solution-based epitaxial growth, respectively, ensuring the formation of well-intergrown b-oriented MFI layers with sub-100-nm thickness. Moreover, our study indicated that b-oriented ultrathin MFI layers could be fabricated on diverse substrates demonstrating excellent anticorrosion capacity, ionic sieving properties, and n-/i-butane isomer separation performance. Copyright © 2020 The Authors, some rights reserved; exclusive licensee American Association for the Advancement of Science. No claim to original U.S. Government Works. Distributed under a Creative Commons Attribution NonCommercial License 4.0 (CC BY-NC).Droplet manipulations are fundamental to numerous applications, such as water collection, medical diagnostics, and drug delivery. Structure-based liquid operations have been widely used both in nature and in artificial materials. However, current strategies depend mainly on fixed structures to realize unidirectional water movement, while multiple manipulation of droplets is still challenging. Here, we propose a magnetic-actuated robot with adjustable structures to achieve programmable multiple manipulations of droplets. The adjustable structure redistributes the resisting forces from the front and rear ends of the droplets, which determine the droplet behaviors. We can transport, split, release, and rotate the droplets using the robot. This robot is universally applicable for manipulation of various fluids in rough environments. These findings offer an efficient strategy for automated manipulation of droplets. Copyright © 2020 The Authors, some rights reserved; exclusive licensee American Association for the Advancement of Science.