https://www.selleckchem.com/CDK.html 25 V during the first reduction process. The decomposition reaction was more vigorous and occurred at a higher potential in the propylene carbonate-based electrolyte solution, resulting in the formation of a thick solid electrolyte interphase film. These results suggest that the solid electrolyte interphase formation on Si electrodes is strongly influenced by the composition of the electrolyte solution.In this paper, we propose a method to detect thermal transport suitable in nanometers scale. It is feasible using the GIDL-biased MOSFET as thermal sensor. It is because the GIDL current is occurred due to the band-to-band tunnelling of the electron in a small overlap region between gate and drain. Using the relation between the thermal transport and the thermal properties (the heat resistivity and heat capacity), we conducted two ways to heat up. By generating heat in the step and sinusoidal wave form with a transistor and observing the response at other place, we were able to estimate the speed of heat on the chip. The thermal response is measured by the GIDL current of another MOSFET. The speed of the heat generated at the MOSFET is measured about 2.12 m/s.Ovonic Threshold Switch (OTS) device is most popular switching device in PRAM. There are many OTS device research; however, it is hard to make reasonable OTS device which uses a circuit simulation and real device. In this work, we studied the OTS device emulation circuit, which can follow OTS characteristic, especially snapback current using 0.18 μm CMOS technology. This circuitry composes snapback current generator, cut off switch and output driver. Snapback current generator can make the current level up to 300 μA.It is essential for multifunctional asphalt to develop the new nanostructures with high photocatalytic activity in order to endow asphalt with the self-cleaning ability of contamination. Multi-walled carbon nanotubes/ZnO (MWNTs/ZnO) composites were synthesized base