https://www.selleckchem.com/products/tocilizumab.html These findings provide an insight into the TB effect on the nanoindentation response of FeNiCrCoCu HEA, and develop the application of nanotwinned HEA systems.Structurally ordered Pt3Co/C nanoparticles (NPs) were obtained via a spray paint drying method with an annealing treatment. The addition of a suitable dose of polyvinylpyrrolidone resulted in a narrow size distribution of the Pt3Co/C-600-1 NPs, an average particle size of ca. 4.6 nm, which may be due to the enhanced dispersion in aqueous solution resulting from the carbon support. The sample denoted as Pt3Co/C-600-1 NPs performs high activity for oxygen reduction reaction with the mass activity (MA) ca. 3 times higher than that of a commercial Pt/C catalyst at 0.9 V. Accelerated durability tests (ADTs) showed that Pt3Co/C-600-1 NPs exhibit superior stability with a minimal loss of 17.5% in MA at 0.9 V after 5000 cycles, while Pt/C catalysts show loss of 44.4%. This simple two-step strategy provides an effective way to prepare Pt-based catalysts for industrial application.The number density and the arrangement of metal nanoparticles in composite materials have a significant effect on their performance and hence their suitability for use in sensors and devices. Forming one-dimensional arrays of metal nanoparticles is one way of controlling their number density and arrangement in the devices. In this study, we fabricated one-dimensional arrays of gold nanoparticles by adsorbing them on linearly distributed hard segments present on the surfaces of segmented polyurethane nanofibers, which were produced by electrospinning under a stretching force. The length of the one-dimensional array was approximately 500 nm. Furthermore, the interparticle distance was almost constant at approximately 14 nm. Thus, the proposed method is suitable for fabricating one-dimensional arrays of metal nanoparticles with high precision.Resveratrol, a polyphenolic and biocompatible molec