https://www.selleckchem.com/products/valproic-acid.html In this article, size-dependent vibrations and the stability of moving viscoelastic axially functionally graded (AFG) nanobeams were investigated numerically and analytically, aiming at the stability enhancement of translating nanosystems. Additionally, a parametric investigation is presented to elucidate the influence of various key factors such as axial gradation of the material, viscosity coefficient, and nonlocal parameter on the stability boundaries of the system. Material characteristics of the system vary smoothly along the axial direction based on a power-law distribution function. Laplace transformation in conjunction with the Galerkin discretization scheme was implemented to obtain the natural frequencies, dynamical configuration, divergence, and flutter instability thresholds of the system. Furthermore, the critical velocity of the system was evaluated analytically. Stability maps of the system were examined, and it can be concluded that the nonlocal effect in the system can be significantly dampened by fine-tuning of axial material distribution. It was demonstrated that AFG materials can profoundly enhance the stability and dynamical response of axially moving nanosystems in comparison to homogeneous materials. The results indicate that for low and high values of the nonlocal parameter, the power index plays an opposite role in the dynamical behavior of the system. Meanwhile, it was shown that the qualitative stability of axially moving nanobeams depends on the effect of viscoelastic properties in the system, while axial grading of material has a significant role in determining the critical velocity and natural frequencies of the system.In this paper, we report high-performance Micro-LEDs on sapphire substrates, with pixel size scaling to 20 µm and an ultra-high current density of 9902 A/cm2. The forward voltages (VF) of the devices ranged from 2.32 V to 2.39 V under an injection current density of