Stainless steel is an important material used in many applications due to its mechanical strength and corrosion-resistant properties. The high corrosion resistance of stainless steel is provided by the passive film. Different stainless steels have different alloy elements and surface properties which could have a significant influence on bacterial attachment to the surface and thus might result in different microbial corrosion behaviours. In this study, the effect of adhesion of sulfate-reducing bacteria (SRB) on corrosion behaviour in artificial seawater on different stainless steels was investigated. Stainless steel materials used were SS 410, SS 420, SS 316 and DSS 2205 and pure chromium. The contact angle was measured to study the effect of surface properties of materials. Adhesion was measured by counting cells attached to the surface of materials. The corrosion behaviour of the materials was measured by electrochemical testing including measuring open circuit potential, electrochemical impedance spectroscopy and potentiodynamic behaviour. The long-term corrosion behaviour of each material was studied after six months of exposure by measuring weight loss and surface analysis with scanning electron microscope with energy-dispersive X-ray analysis. Hydrophobicity had a strong effect on bacterial attachment. Alloying elements e.g. nickel also had shown its ability to attract bacteria to adhere on the surface. However, the corrosion rate of different materials is determined not only by bacterial attachment but also by the stability of the passive film which is determined by the alloying elements, such as Mo and Cr. Chromium showed high resistance to corrosion, possibly due to toxicity on bacterial attachment. The nature of bacterial attachment and corrosion behaviour of the materials are discussed.Hibernation has been selected for increasing survival in harsh climatic environments. Seasonal variability in temperature may push the body temperatures of hibernating animals across boundaries of alternative states between euthermic temperature and torpor temperature, typical of either hibernation or summer dormancy. Nowadays, wearable electronics present a promising avenue to assess the occurrence of criticality in physiological systems, such as body temperature fluctuating between attractors of activity and hibernation. For this purpose, we deployed temperature loggers on two hibernating edible dormice for an entire year and under Mediterranean climate conditions. Highly stochastic body temperatures with sudden switches over time allowed us to assess the reliability of statistical leading indicators to anticipate tipping points when approaching a critical transition. Hibernation dynamics showed flickering, a phenomenon occurring when a system rapidly moves back and forth between two alternative attractors preceding the upcoming major regime shift. Flickering of body temperature increased when the system approached bifurcations, which were also anticipated by several metric- and model-based statistical indicators. Nevertheless, some indicators did not show a pattern in their response, which suggests that their performance varies with the dynamics of the biological system studied. Gradual changes in air temperature drove transient between states of hibernation and activity, and also drove hysteresis. For hibernating animals, hysteresis may increase resilience when ending hibernation earlier than the optimal time, which may occur in regions where temperatures are sharply rising, especially during winter. Temporal changes in early indicators of critical transitions in hibernation dynamics may help to understand the effects of climate on evolutionary life histories and the plasticity of hibernating organisms to cope with shortened hibernation due to global warming.Personal contacts drive COVID-19 infections. After being closed (23 March 2020) UK primary schools partially re-opened on 1 June 2020 with social distancing and new risk mitigation strategies. We conducted a structured expert elicitation of teachers to quantify primary school contact patterns and how contact rates changed upon re-opening with risk mitigation measures in place. These rates, with uncertainties, were determined using a performance-based algorithm. We report mean number of contacts per day for four cohorts within schools, with associated 90% confidence ranges. Prior to lockdown, younger children (Reception and Year 1) made 15 contacts per day [range 8.35] within school, older children (Year 6) 18 contacts [range 5.55], teaching staff 25 contacts [range 4.55] and non-classroom staff 11 contacts [range 2.27].  https://www.selleckchem.com/products/beta-aminopropionitrile.html  After re-opening, the mean number of contacts was reduced by 53% for young children, 62% for older children, 60% for classroom staff and 64% for other staff. Contacts between teaching and non-teaching staff reduced by 80%. The distributions of contacts per person are asymmetric with heavy tail reflecting a few individuals with high contact numbers. Questions on risk mitigation and supplementary structured interviews elucidated how new measures reduced daily contacts in-school and contribute to infection risk reduction.Effective removal of 4-chloro-2-methylphenoxyacetic acid (MCPA), an emerging agrochemical contaminant in water with carcinogenic and mutagenic health effects has been reported using hydrothermally synthesized MIL-101(Cr) metal-organic framework (MOF). The properties of the MOF were ascertained using powdered X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, thermal gravimetric analysis (TGA), field emission scanning electron microscopy (FESEM) and surface area and porosimetry (SAP). The BET surface area and pore volume of the MOF were 1439 m2 g-1 and 0.77 cm3 g-1, respectively. Artificial neural network (ANN) model was significantly employed for the accurate prediction of the experimental adsorption capacity (qe ) values with minimal error. A rapid removal of the pollutant (99%) was recorded within short time (approx. 25 min), and the reusability of the MOF (20 mg) was achieved up to six cycles with over 90% removal efficiency. The kinetics, isotherm and thermodynamics of the process were described by the pseudo-second-order, Freundlich and endothermic adsorption, respectively.