In this study, soft magnetic metal was coated on carbon fibers (CFs) using an electroless FeCoNi-plating method to enhance the electromagnetic interference (EMI) shielding properties of CFs. Scanning electron microscopy, X-ray diffraction, and a vibrating sample magnetometer were employed to determine the morphologies, structural properties, and magnetic properties of the FeCoNi-CFs, respectively. The EMI shielding behavior of the FeCoNi-CFs was investigated in the frequency range of 300 kHz to 3 GHz through vector network analysis. The EMI shielding properties of the FeCoNi-CFs were significantly enhanced compared with those of the as-received CFs. The highest EMI shielding effectiveness of the 60-FeCoNi-CFs was approximately 69.4 dB at 1.5 GHz. The saturation magnetization and coercivity of the 60-FeCoNi-CFs were approximately 103.2 emu/g and 46.3 Oe, respectively. This indicates that the presence of FeCoNi layers on CFs can lead to good EMI shielding due to the EMI adsorption behavior of the magnetic metal layers.The reuse of industrial silicate solid wastes, including fly ash, slag, and waste rubber, is one of the most significant environmental and economic concerns worldwide [...].The gamma radiation shielding ability for CaO-K2O-Na2O-P2O5 glasses were experimentally determined between 0.0595 and 1.41 MeV. The experimental MAC results were compared with theoretical results obtained from the XCOM software to test the accuracy of the experimental values. Additionally, the effect of increasing the P2O5 in the glass composition, or reducing the Na2O content, was evaluated at varying energies. For the fabricated glasses, the experimental data strongly agreed with the XCOM results. The effective atomic number (Zeff) of the fabricated glasses was also determined. The Zeff values start out at their maximum (12.41-12.55) at the lowest tested energy, 0.0595 MeV, and decrease to 10.69-10.80 at 0.245 MeV. As energy further increases, the Zeff values remain almost constant between 0.344 and 1.41 MeV. The mean free path (MFP) of the fabricated glasses is investigated and we found that the lowest MFP value occurs at the lowest tested energy, 0.0595 MeV, and lies within the range of 1.382-1.486 cm, while the greatest MFP can be found at the highest tested energy, 1.41 MeV, within the range of 8.121-8.656 cm. At all energies, the KCNP40 sample has the lowest MFP, while the KCNP60 sample has the greatest. The half value layer (HVL) for the KCNP-X glasses is determined. For all the selected energies, the HVL values follow the order of KCNP40 less then KCNP45 less then KCNP50 less then KCNP55 less then KCNP60. The HVL of the KCNP50 sample increased from 0.996 to 2.663, 3.392, 4.351, and 5.169 cm for energies of 0.0595, 0.245, 0.444, 0.779, and 1.11 MeV, respectively. The radiation protection efficiency (RPE) results reveal that decreasing the P2O5 content in the glasses improves the radiation shielding ability of the samples. Thus, the KCNP40 sample has the best potential for photon attenuation applications.Herein, a facile method for the preparation of an acrylic resin-based superhydrophobic coating is provided. Firstly, ZnO nanoparticles were modified with silane to obtain hydrophobic ZnO, which was then homogeneously blended with acrylic resin. Subsequently, the mixture was sprayed on an aluminum sheet to form a cured coating. The surface composition and morphology of the coating were characterized using X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), and scanning electron microscopy (SEM). The hydrophobicity, wear resistance, and antibacterial properties of the prepared samples were tested. The optimized hydrophobicity was achieved with 10 wt% modification agent and resin-to-ZnO mass ratio of 14, exhibiting contact and sliding angles of 168.11° and 7.2°, respectively. Wear resistance was insufficient with a low resin content, while it grew with the increase in the resin content. However, when the resin content was excessively high, the hydrophobicity was reduced because the resin could wrap the modified ZnO nanoparticles and decrease the number of hydrophobic groups on the surface. Compared with the pure acrylic resin coating, the ZnO nanoparticle/acrylic resin superhydrophobic coating demonstrated a significant enhancement in the antibacterial properties.Cutting tool wear reduces the quality of the product in production processes. The optimization of both the machining parameters and tool life reliability is an increasing research trend to save manufacturing resources. In the present work, we introduced a computational approach in estimating the tool wear in the turning process using artificial intelligence. Support vector machines (SVM) for regression with Bayesian optimization is used to determine the tool wear based on various machining parameters. A coated insert carbide tool 2025 was utilized in turning tests of 709M40 alloy steel. Experimental data were collected for three machining parameters like feed rate, depth of cut, and cutting speed, while the parameter of tool wear was calculated with a scanning electron microscope (SEM). The SVM model was trained on 162 experimental data points and the trained model was then used to estimate the experimental testing data points to determine the model performance. The proposed SVM model with Bayesian optimization achieved a superior accuracy in estimation of the tool wear with a mean absolute percentage error (MAPE) of 6.13% and root mean square error (RMSE) of 2.29%. The results suggest the feasibility of adopting artificial intelligence methods in estimating the machining parameters to reduce the time and costs of manufacturing processes and contribute toward greater sustainability.Wood is one of the most fully renewable building materials, so wood instead of non-renewable materials produced from organic energy sources significantly reduces the environmental impact. Construction products can be replenished at the end of their working life and their elements and components deconstructed in a closed-loop manner to act as a material for potential construction.  https://www.selleckchem.com/products/fx11.html  Materials passports (MPs) are instruments for incorporating circular economy principles (CEP) into structures. Material passports (MPs) consider all the building's life cycle (BLC) steps to ensure that it can be reused and transformed several times. The number of reuse times and the operating life of the commodity greatly influence the environmental effects incorporated. For a new generation of buildings, the developing of an elegant kinetic wooden façade has become a necessity. It represents a multidisciplinary region with different climatic, fiscal, constructional materials, equipment, and programs, and ecology-influencing design processes and decisions.