Biointerface between amine compounds and AChE/BChE were visualized through Hirshfeld surface analysis. The inter-fragment interaction energies for the possible contacts between amine compounds and amino acid residues were carried out for the first time. All the amine compounds showed mixed-type of inhibition with moderate Ki value in in vitro analysis.Cylinder-shaped NaY zeolite was used as an adsorbent for eradicating both heavy metal ions (Cu2+, Zn2+, Ni2+, and Co2+) and proteins from the waste streams. As a pseudo-metal ion affinity adsorbent, NaY zeolite was used in the capture of heavy metal ions in the first stage. The amount (molar basis) of metal ions adsorbed onto NaY zeolite decreased in the order of Cu2+ > Zn2+ > Co2+ > Ni2+. Bovine serum albumin (BSA) was utilized as a model of proteins used in the waste adsorption process by NaY zeolite. The adsorption capacities of NaY zeolite and Cu/NaY zeolite for BSA were 14.90 mg BSA/g zeolite and 84.61 mg BSA/g zeolite, respectively. Moreover, Cu/NaY zeolite was highly stable in the solutions made of 2 M NaCl, 500 mM imidazole or 125 mM EDTA solutions. These conditions indicated that the minimal probability of secondary contamination caused by metal ions and soluble proteins in the waste stream. This study demonstrates the potential of Cu/NaY zeolite complex as an efficient pseudo-metal chelate adsorbent that could remove metal ions and water-soluble proteins from wastewater concurrently.The objective of this study was to investigate the antimicrobial and anticancer properties of a fucoidan extract and subsequent fractions isolated from the macroalgae Fucus vesiculosus. The fractions obtained (>300 kDa, 300 kDa fraction presented the lowest IC50 values (0.052% - 24 h; 0.032% - 6 days). The potential bioactivity of fucoidan as an antimicrobial and anticancer agent was demonstrated in this study. Hence, the related mechanisms of action should be explored in a near future.Chitosan/fucoidan nanoparticles were created using two fucoidans from the Fucus evanescens algae. https://www.selleckchem.com/products/selonsertib-gs-4997.html One of them was a regular fucoidan obtained for the first time from the alga harvested at the reproductive growth stage, using only standard extraction methods, without additional modifications. Its structure was established via NMR spectroscopy to consist of the repeating →3)-α-L-Fucp-(2,4SO3-)-(1 → 4)-α-L-Fucp-(2SO3-)-(1→ fragment. Such fragment also coustituted 55% of the other fucoidan's structure, however it also included long sequences of α-L-fucopyranose residues sulfated only at C2. The nanoparticles were re-dispersed in water and the influence of fucoidan/chitosan mass ratio on the nanoparticles' size and zeta potential was investigated. 3D models of the regular fucoidan and chitosan's sections were created and their molecular docking was performed, showing that either polymer could occupy the exterior of the complex, depending on their ratio. Thermodynamic parameters of fucoidan-chitosan binding process were accessed, with the results indicating that significant conformational changes of fucoidan and chitosan molecules take place during the interaction, presumably to allow for more effective binding.Posidonia oceanica waste biomass has been valorized to develop bioactive multifunctional cellulosic aerogels (HCAG) by simpler and greener protocols. Hydrophobization of cellulosic aerogels was achieved through PLA coating, while bioactivity was imparted by the incorporation of hydrophilic (E2) and hydrophobic extracts (E3) produced from the same biomass. The incorporation of extracts led to denser aerogels, with less porous structures. These aerogels showed outstanding water and oil sorption capacities (1500-1900%), being able to release the adsorbed liquid almost completely after 7 days. Interestingly, all the aerogels showed a positive inhibition effect (23-91%) on the β-carotene bleaching assay. Moreover, the aerogels loaded with extracts, especially when combining E2 and E3, were able to reduce the oxidation of lipids and oxymyoglobin in red meat after 10 days of storage. This evidences the potential of these multifunctional aerogels as bioactive adsorbing pads to preserve the quality of fresh packaged foods.Historically, lignin has been produced as a waste by-product in industrial processes. In this study, lignosulfonate nanoparticles were fabricated and freeze-dried for use as a precursor material for carbonization. The use of the carbonized lignins for the adsorption of textile effluent as a value-added application is demonstrated. Characterization of the as received lignin (LN) and the developed nano-based freeze-dried lignin (NFLN) were performed prior to and after carbonization at 600, 750, 900 and 1050 °C. Using probe sonication, lignosulfonates were broken down into nanoparticles with lower weight-average molecular weight as verified by dynamic and static light scattering techniques. The difference between the LN and the NFLN was determined to be primarily morphological as the sonication and freeze-drying process imparted a platelet-like shape to the NFLN biocarbons and an increased surface area, while the remaining functionality was similar. The adsorption behaviour of methylene blue (MB), a synthetic cationic dye, was investigated using adsorption isotherm and kinetic models, with the NFLN exhibiting a maximum adsorption capacity of 109.77 mg/g. Overall, electrostatic attraction and hydrogen bonding contribute significantly to the MB adsorption. Further preliminary work was also performed demonstrating the coating of polyurethane foam for the adsorption of MB. These renewable biocarbons show promising properties for use as additive in adsorbent, coating, pigment or as a filler in polymer composite applications.Mandarin (Citrus reticulata L.) essential oil (MEO) reportedly displays excellent antimicrobial properties. In this study, MEO was loaded into chitosan nanoparticles (CSNPs). The characteristics, antibacterial properties and benefit in pork preservation of MEO-CSNPs were evaluated. The MEO-CSNPs displayed an excellent encapsulation efficiency (EE) (67.32%-82.35%), the particle size values of 131.3 nm-161.9 nm, and the absolute zeta potential values above 30 mV. Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD) analysis, and thermogravimetric analysis (TGA) revealed that the MEO was incorporated into CSNPs without requiring a chemical reaction, the antibacterial activity of the MEO remained. Furthermore, the damage of MEO-chitosan nanoemulsions (MEO-CSs) to the cell membranes of Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli) was confirmed by the change of bacterial cell morphology. The anti-biofilm assays verified that the MEO-CSs substantially inhibited biofilm formation and destroyed the mature biofilms.