C4F7N (fluorinated nitrile) has been introduced as a remarkable substitute gas for the greenhouse gas SF6 (sulfur hexafluoride) which is used in gas-insulated equipment (GIE). Intensive investigations about the compatibility between C4F7N and materials used in GIE are required to decide their long-term behavior. In this paper, the interaction mechanism between EPDM, used as a sealing ring in GIE, and C4F7N-CO2 was explored. The composition and morphology properties of EPDM were first revealed based on scanning electron microscopy and X-ray photoelectron spectroscopy. It was found that EPDM rubber is incompatible with the C4F7N-CO2 gas mixture at temperatures higher than 70 °C. There exist chemical reactions between EPDM and C4F7N, resulting in the generation of gaseous byproducts including C3F6, CF3H, and C2F5H and corrosion of EPDM. DFT calculation also shows that the interaction between C4F7N and EPDM could cause the dissociation of C4F7N. Relevant results provide important guidance for the engineering application of the C4F7N gas mixture. Copyright © 2020 American Chemical Society.A type of line defect (LD) composed of alternate squares and octagons (4-8) as the basic unit is currently an experimentally available topological defect in the graphene lattice, which brings some interesting modifications to the magnetic and electronic properties of graphene. The transitional-metal (TM) atoms adsorb on graphene with a line defect (4-8), and they show interesting and attractive structural, magnetic, and electronic properties. For different TMs such as Fe, Co, Mn, Ni, and V, the complex systems show different magnetic and electronic properties. The TM atoms can spontaneously adsorb at quadrangular sites, forming a metallic atomic chain along LD on graphene. The most stable configuration is the hollow site of a regular tangle. The TMs (TM = Co, Fe, Mn, Ni, V) tend to form extended metal lines, showing a ferromagnetic (FM) ground state. For the Co, Fe, and V atoms, the system is half-metal. The spin-α electron is insulating, while the spin-β electron is conductive. For the Mn and Ni atoms, Mn-LD and Ni-LD present a spin-polarized metal; for the Fe atom, Fe-LD shows a semimetal with Dirac cones. For Fe and V atoms, both Fe-LD and V-LD show spin-polarized half-metallic properties. And its spin-α electron is conducting, while the spin-β electron is insulating.  https://www.selleckchem.com/products/mivebresib-abbv-075.html  Different TMs adsorbing on a graphene nanoribbon forming the same stable configurations of metal lines show different electronic properties. The adsorption of TMs induces magnetism and spin polarization. These metal lines have potential applications in spintronic devices and work as a quasi-one-dimensional metallic wire, which may form building blocks for atomic-scale electrons with well-controlled contacts at the atomic level. Copyright © 2020 American Chemical Society.Laser ablation in liquid (LAL), one of the promising pathways to produce nanoparticles, is used herein for the modification of the abundant biowaste, calcium lignosulfonate (CLS), adorning it with palladium nanoparticles (Pd NPs). The ensuing Pd/CLS nanocomposite, fabricated via a simple stirring method, is deployed for hydrogen storage and environmental cleanup studies; a hydrogen storage capacity of about 5.8 C g-1 confirmed that Pd NPs serve as active sites for the adsorption of hydrogen. Additionally, the novel, sustainable, and reusable nanocomposite also exhibits superior catalytic activity toward the reduction of hexavalent chromium [Cr(VI)], 4-nitrophenol (4-NP), and methylene blue (MB) in an aqueous solution in a short time; the synthesized nanocatalyst could be reused for at least eight successive runs. Copyright © 2020 American Chemical Society.Understanding spatiotemporal organization in bacteria under an external AC electric field is not only very interesting from a perspective of studying assembly and disassembly in a model biofilm but also provides insight into the intricate role of anisotropic interaction with bacterial dynamics that can generate interesting complex structures. In the current study, using confocal microscopy, we demonstrate such complex assemblies of monodisperse tetrad clusters of Micrococcus luteus, an environmental bacterium synthesized under a controlled growth condition. These clusters under the AC field produce a range of interesting structures such as chains, double helix, and bundles, which are instantaneously reversible when the field is switched off. Our studies can provide important insights into the natural organization of the clustered bacterium (with relevance in biofilm-like states) and generate strategies for biomaterial fabrication with a switchable functionality. Copyright © 2020 American Chemical Society.The use of nanomaterials has transformed fields such as medicine and electronics. However, aggregation of nanomaterials in aqueous solutions, difficult recovery of spent nano-adsorbents from reactors, and a tremendous pressure loss caused by nano-adsorbents in adsorption columns have prevented the wide-scale use of nano-adsorbents in industrial applications for water purification. An over-reliance on traditional adsorption media for fluid purification practices has slowed innovation in this field. This study serves as a proof of concept for a new approach in utilizing nano-adsorbents in water treatment. A system based on the concept of renal dialysis was used to treat a solution of arsenite using two-line ferrihydrite (Fh) under environmental conditions. The performance was compared to traditional batch studies, and environmental variables pH and Eh were monitored. The system removed 67 and 91% of arsenite at 1.22 and 2.61 g/L Fh loadings, respectively, in comparison to batch experiments that removed 82 and 94% for similar loadings. Operational conditions and the physical design of the vessel limited the extent of removal that could be obtained with the system. Design advantages, shortcomings, and required improvements are discussed. Copyright © 2020 American Chemical Society.TiO2 nanofibers were fabricated by combination of sol-gel and electrospinning techniques. Ag-doped TiO2 nanofibers with different Ag contents were prepared by two different methods (in situ electrospinning or wetness impregnation of Ag on TiO2 nanofibers) and heat treated at 500 °C for 2 h under an air or N2 atmosphere. The obtained catalysts were characterized by field emission scanning electron microscopy, X-ray diffraction, photoluminescence, and N2 adsorption analyzed by the Brunauer-Emmett-Teller (BET) method. Photocatalytic glucose conversions with electrospun TiO2 and Ag-doped TiO2 nanofibers for production of high-value products were carried out. From different doping methods, the results indicated that 1 wt % Ag-TiO2 nanofibers prepared by an in situ method with calcination under N2 achieved the highest glucose conversion (85.49%). From several Ag loading contents (i.e., 0, 1, 2, and 4 wt %) in Ag-doped TiO2 nanofibers, the nanofibers exhibited different glucose conversions [in order of 2 wt % (99.65%) > 1 wt % (85.