In conclusion, physiological stress mediated by CORT modulated bacterial communities in the small intestine and increased densities of C. perfringens. This implicates stress as an important mediator of this important enteric pathogen in poultry.The study aims at reusing and recycling the protein hide waste from the leather industry in ecological conditions by elaborating an innovative procedure in order to obtain a collagen matrix functionalized with nitrogen, phosphorus, and potassium (NPK) nutrients to be used for preparing smart fertilizers. This is an interdisciplinary approach, as it starts from hide waste raw material as a critical industrial waste, which is then subjected to several technological steps by selection of optimal processing parameters, followed by product fabrication at the laboratory, and next scales to the industrial pilot plant to obtain novel agro-hydrogels. In this context, the technology scheme for collagen hydrolysate with encapsulated nutrients was proposed and the process parameters were optimized by functionalization of agro-hydrogels with various natural and synthetic polymers, such as polyacrylamide, poly(sodium 4-styrenesulfonate-co-glycidyl methacrylate) copolymer, starch or dolomite. Based on the laboratory experiments, a pilot plant was constructed and tested. Taking as reference the collagen hydrolysate with encapsulated nutrients, the new fertilizers were adequately characterized by chemical analysis, determination of biodegradability and the degree of release of oxidable compounds in water. Based on the biodegradation mechanism and kinetic analysis of oxidable compounds release, adequate arguments are evidenced to demonstrate that these fertilizers can be applied for amendment of poor agricultural soils.Increasingly strict regulations, as well as an increased public awareness, are forcing industry, including the foundry industry, to develop new binders for molding sands, which, while being more environmentally friendly, would simultaneously ensure a high quality of castings. Until recently, binders based on synthetic resins were considered to be such binders. However, more accurate investigations indicated that such molding sands subjected to high temperatures of liquid metal generated several harmful, even dangerous substances (carcinogenic and/or mutagenic) from the benzene, toluene, ethylbenzene and xylenes (BTEX) and polycyclic aromatic hydrocarbons groups (PAHs). An assessment of the most widely used molding sands technologies at present with organic binders (synthetic resins) from the no-bake group (furan no-bake and phenolic-ester no-bake) and their harmfulness to the environment and work conditions is presented in this paper. In the first stage of this research, gases (from the BTEX and PAHs groups) emitted when the tested molds were poured with liquid cast iron at 1350 °C were measured (according to the authors' own method). The second stage consisted of measuring the emission of gases released by binders subjected to pyrolysis (the so-called flash pyrolysis), which simulated the effects occurring on the boundary liquid metal/molding sand. The gases emitted from the tested binders indicated that, in both cases, the emission of harmful and dangerous substances (e.g., benzene) occurs, but, of the given binder systems, this emission was lower for the phenolic-ester no-bake binder. The obtained emission factors of BTEX substances show higher values for furan resin compared to formaldehyde resin; for example, the concentration of benzene per 1 kg of binder for furan no-bake (FNB) was 40,158 mg, while, for phenol-formaldehyde no-bake (PFNB), it was much lower, 30,911 mg. Thus, this system was more environmentally friendly.In this study, the exothermic temperature performance of various Al/Ni multilayer powders with particle sizes ranging from under 75 to over 850 µm, which generate enormous heat during self-propagating exothermic reactions, was determined using a high-speed sampling pyrometer. The Al/Ni multilayer powders were prepared by a cold-rolling and pulverizing method.  https://www.selleckchem.com/products/bal-0028.html  The multilayer constitution of the Al/Ni multilayer powders was examined by observing the cross-section of the powders using scanning electron microscopy; the results indicate that the powders had similar lamellar structures regardless of the particle size. Exothermic reactions were carried out to measure the temperature changes during the experiment using a pyrometer. We found that the maximum temperature and the duration of the exothermic reaction increased with an increase in the particle size caused by the heat dissipation of the surface area of the Al/Ni multilayer powder. This indicates that the thermal characteristics of the exothermic reaction of the Al/Ni multilayer powder can be controlled by adjusting the particle size of the Al/Ni multilayer powder. Finally, we concluded that this controllability of the exothermic phenomenon can be applied as a local heating source in a wide range of fields.Curcumin is a hydrophobic drug gaining growing attention because of its high availability, its innocuity, and its anticancer, antitumoral, and antioxidative activity. However, its poor ‎‎bioavailability in the human body, caused by its low aqueous solubility and fast degradation, ‎‎presents a big hurdle for its oral administration. Here, we used nano-vesicles made of ‎‎phospholipids to carry and protect curcumin in its membrane. Various curcumin amounts were ‎‎encapsulated in the produced phospholipid system to form drug-loaded liposomes. ‎Curcumin's ‎concentration was evaluated using UV-visible measurements. The maximal ‎amount of curcumin ‎that could be added to liposomes was assessed. Nuclear magnetic ‎resonance (NMR) analyses ‎were used to determine curcumin's interactions and localization ‎within the phospholipid ‎membrane of the liposomes. X-ray scattering (SAXS) and atomic ‎force microscopy (AFM) ‎experiments were performed to characterize the membrane structure ‎and organization, as well as its ‎mechanical properties at the nanoscale. Conservation of the membrane's properties is found with ‎the addition of curcumin in various ‎amounts before saturation, allowing the preparation of a ‎defined nanocarrier with desired ‎amounts of the drug.