https://www.repairmywindowsanddoors.co.uk/bifold-doors-birmingham/ Bifold Door Repairs Bifold doors for interior use can be used to connect different areas of your home. They can become damaged and may require repair at times. If your bifold doors are letting in draughts or rattle in the wind it's likely that your seals have begun to wear down. This is a normal thing to happen with time. Hinges The hinges on your bifold door are crucial to how smoothly it opens or closes. If they are bent or damaged, the doors may jam or stop closing. It's possible to replace or adjust the hinges when this happens. This is a relatively simple procedure that doesn't require a professional. First, ensure that the hinges are fully in their brackets. If not then loosen the top screw and move it to the position that allows the hinge to rest securely in the bracket. Then tighten the screw and repeat the process on the opposite side. Once both sides are in place, tighten the screws on each side, and then test the door. If the door doesn't close properly, it could be a sign of an issue with the lock or door frame. It could also be a small object that's stopping the door from opening and closing correctly. Bifold doors can tilt because of a crack in the pivot pin. This could cause the doors to be difficult to open and close, or even scrape the floor when they're closed. The good news is that it's simple to fix this problem yourself, and it's often an easy job. is usually caused by a small crack in the wood that can be repaired using carpenter's adhesive and a C-clamp. Start by prying out the pin using the help of pliers or a screwdriver. Then, loosen the hole a bit and then spread some carpenter glue inside. After the glue has been applied, you can clamp the area and let it sit for 3-4 hours before putting the door in place. Another easy solution to this issue is to use the corner brace kit that will seal the crack and make it easier to open and close. They are available at the majority of h