https://telegra.ph/Is-Technology-Making-Ghost-Immobiliser-Fitting-Better-Or-Worse-12-10 Autowatch Ghost Immobiliser Installation The Ghost is the UK's most advanced aftermarket immobiliser designed for CAN buses. It's subtle, doesn't have keys or LEDs and is concealed within the wiring of the vehicle. The user can also deactivate the system temporarily by using Transport Mode when renting out their vehicle. This guide will take you through the installation process of a Ghost immobiliser. Professional Installation The Autowatch Ghost immobiliser is a modern security device that guards your vehicle from hacking, key cloning and relay attacks. The system is directly connected to the ECU of your car and secured by a PIN code you set. It's inaccessible to thieves using scanners for diagnostics or other modern methods, and is unable to be disabled through circuit cuts. The system is simple to use, however professional installation is recommended to ensure a smooth connection with the ECU of your vehicle. Installers who are approved by Thatcham can assist with the installation and programing of your Ghost system. They can also suggest a tracking device or alarm system to complete your vehicle's security package. First, the installer needs to disconnect your battery to prevent accidental airbag deployment or short circuits. Once this is done the installer is now able to begin work. Hand tools are essential to make precise connections and a multimeter can be used to test electrical values and ensure safety. Cable ties and insulation tape are also vital for protecting connections and keeping wiring tidy. The Ghost Immobiliser user's guide will provide specific guidelines tailored to your model. It is essential to choose a grounding location that is free of paint or debris during installation. The installer must ensure that the immobiliser's H and CAN L wires are connected to the appropriate ports on your vehicle's ECU. Depending on the model, these wires may need to be solder